Convenient functionsSQT0993 67Other operationsThe HOLD function deactivates all buttons on theunit and remote control.Press and hold [OK] and [BACK/RETURN ]simultaneously for at least 5 seconds until the"REC", "INFO1" and "INFO2" indicators on thisunit all flash for 5 seconds.To cancel the HOLD functionPress and hold [OK] and [BACK/RETURN ]simultaneously for at least 5 seconds until the"REC", "INFO1" and "INFO2" indicators on thisunit stop flashing and go off.Preparation• Show the “Enter Title Name” screen, etc.To end partwayPress [BACK/RETURN ]. (Text is not added.)• The maximum number of characters depends on themedia.When the image does not match the screen sizeof the TV, you can enlarge the image to fill thescreen.1 Press [OPTION].2 Select “Playback Settings” in “PlaybackMenu”, then press [OK].3 Select “Aspect” in “Basic Operation”, thenpress [OK].4 Select the item, then press [OK].• This function does not work on 3D contents.• The screen mode is switched to “Normal” in the followingsituations:- when you change the channel- when you start or end the playback of a title- when you switch the unit on or to standby mode.• When “TV Aspect” (> 61) is set to “4:3” or “Letterbox”, the“Zoom” effect is disabled.HOLD functionEntering text1 Select a character, then press [OK].Repeat this step to enter other characters.• Green: Enter Alphanumeric characters• Red: Enter Symbols• Yellow: Enter Other Characters, such asumlaut mark or accent grave• [PAUSE ;]: Delete a character• [PLAY/a1.3 1]: Shift the alphabeticcharacters on the screen to uppercase/lower case2 Press [STOP ∫] (Finish).“Writing...” appears then the screen returnsto the previous screen and so on.OKRETURN1qaz Delete2wx/3ec:4rv~5tb_6yn-7um,8i@;9o*‘0ps d f g h j k l .#“Symbols Alphanumeric ShiftEnter Title Name FinishOther CharactersName field: shows the text you haveenterede.g.,Switching the aspect ratio of thescreenNormal:Normal outputSide cut:The black bars on the right and left sides ofthe 16:9 image disappear and the image isenlarged.Zoom:The black bars on the top and bottom sidesof the 4:3 image disappear and the image isenlarged.