Panasonic DMR-HWT250 Operating Instructions Manual

Panasonic DMR-HWT250 Operating Instructions Manual Manual pdf 26 page image

RecordingSQT099326Timer recording• This unit has several functions that enable timer recordingsto be controlled by the signal sent from the broadcaster.(> 27) If the signal is not sent correctly, the recording maylack the beginning or the ending part of the programmes.• Some broadcasters may not send programme information.When programme information is not displayed correctly,use manual timer recording. (> 28)• If the unit cannot record the selected programme, the unitwill record the repeat programme if it is available. However,this unit will not record the repeat programme, if any part ofthe selected programme is recorded.To use TV Guide (> 22)Operation during Recording (> 25)1 Select the programme to edit, then press the[OK] or [STATUS ].2 Select “Edit Recording”, then press [OK].3 Go to step 3 on page 28, “Manuallyprogramming timer recording”.• Some options cannot be changed when“Guide Link” is effective. (> 27, 29)Select the programme to cancel, then press the[REC ¥].Select “Single Timer Recording” or “Series TimerRecording” (> 27), then press [OK].• You can enter up to 32 programmes within amonth in advance. (Each daily or weeklyprogramme is counted as one programme.)• This unit can record two programmes beingbroadcasted at the same time.PreparationIf you want to change the recording mode:Press [REC MODE] and select the recordingmode, then press [OK].1 Press [GUIDE].TV Guide screen appears.2 Select the programme, then press the[REC ¥].The timer icon “F” (red) is displayed.• If on-screen instructions are displayed,follow them.To edit the timer recording on the TV GuidescreenTo cancel a timer recording on the TV GuidescreenIf the screen for selecting single or seriestimer recording appears