91RQT9439Convenientfunctions(All factory default settings are indicated with underlined text.)OthersAutomatic StandbySelect how long the unit remains on when it is not being used.[2 hours] [4 hours] [6 hours] [Off]Remote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.[DVD 1] [DVD 2] [DVD 3]Use “DVD 1”, the factory set code, under normal circumstances.1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or“DVD 3”) and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].∫ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remote control to match the main unit’s(> step 2).[Note]Executing “Shipping Condition” in the Setup menu returns the mainunit code to “DVD 1”. Change the remote control code to 1(> step 2).ClockThis unit usually obtains time and date information from digitalbroadcasts and automatically corrects the time several times a day.However, if the time is not set correctly, use the settings listed in themethod below.1 Press [3, 4] to select “Off” of “Automatic” and press [OK].When you select “Off”2 Press [2, 1] to select the item you want to change.The items change as follows:Hour!#Minute!#Second!#Day!#Month!#Year^-----------------------------------------------------------------------------------------J3 Press [3, 4] to change the setting.4 Press [OK] when you have finished the settings.The clock starts.∫ To change the Time ZoneWhen the time is not correct, set “Time Zone” (GMT -6 to + 6).1 Press [3, 4] to select “On” of “Automatic” and press [OK] instep 1.Auto clock setting starts. This takes a few minutes.“Automatic clock setting completed.” screen is displayed.2 Press [1].3 Press [3, 4] to select the correct time zone and press [OK].4 Press [RETURN ].ClockTimeAutomatic Time ZoneDateAutomaticPlease set the clock.OK: access RETURN: leaveOKRETURN15 45 39 27 5 2009OffTime Zone > belowPIN EntryThis PIN will be used for following controlling– DVD-Video playback– Using VIERA CAST≥Make a note of PIN in case you forget it.1 Press [3, 4] to select the number, then press [1].≥You can also use the numbered buttons.2 Repeat step 1 for enter 4-digit PIN.3 Press [OK] to confirm.Power Save[On] Power consumption is minimized when the unit is turned tostandby (> 111).[Off] It is possible to start quickly from standby mode.≥“Unit’s Display” (> 88) is fixed with “Automatic” when “PowerSave” is set to “On”, and is changed to “Bright” when “PowerSave” is set to “Off”.≥This function cannot be enabled when the DLNA function isenabled in "Home Network ( DLNA ) Settings" or "Server ( DLNA )Settings". (> 90)System Update (> 94)In order to update this unit’s software (firmware) and to supportsystem changes made by broadcasts, this unit periodicallyperforms software (firmware) updates.Press [OK] to show the following settings.Software Update in Standby[0:00 to 23:00]§ When you set this unit to standby mode,software (firmware) updates and TV Guidedata are downloaded automatically at thespecified time.[Off]§ Default setting is “3:00”.Software LicenceInformation about the software licence is displayed.DivX RegistrationYou need this registration code to purchase and play DivX Video-on-Demand (VOD) content (> 43).Initialize≥Press [OK] to show the following settings.Shipping ConditionAll the settings except for the ratings level and ratings PIN returnto the factory preset. The timer recording programmes are alsocancelled.[Yes] [No]Default SettingsAll the settings other than the tuning settings, clock settings,language settings, disc language settings, ratings level, ratingsPIN, remote control code, network settings etc. return to thefactory presets.[Yes] [No]OKRemember the PIN.PIN Entry0 0 0 0