324SEP 2004Ver. 1.2DP-1520P/1820P/1820EMain Unit Firmware Code Updating Instructions1. Updating through a LAN Port (The Quickest and Most Easiest Method)The firmware code can be easily updated when the main unit is connected to a LAN.The Network Firmware Update Tool can also be used by connecting to the machine using a crossovercable, if the unit is not connected to a LAN.1) Install the Network Firmware Update Tool to your PCThe option CD-ROM includes the Network Firmware Update Tool and the Main Unit Firmware Code.Please refer to the following Operating Instructions to install the Network Firmware Update Tool.The installation password is "workio".Operating Instructions:\xFirmware\Tools\NwFirmup\NwFirmup OI.pdf (Refer to the Network Firmware Update Tool OI on theCD)Setup:\xFirmware\Tools\NwFirmup\Setup\Setup.exe2) Preparing the Firmware CodeDouble click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on theCD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extractedautomatically into the designated folder when the Archived file (.exe) is Double-clicked.Example:From:Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.batFirmware Code File: DP-1520_1820_PU_xxxxxx.exeTo:Firmware Data Folder: C:\ Panasonic \ Panasonic-FUP \ Data3) Preparing the Main Unit for the Firmware UpgradeMake sure the unit's Key Operator Password is the same as the tool's password.Make sure the unit is in an idle state (e.g. not making copies, not printing, etc.).4) Upgrading the Main Unit's Firmware CodeStart the Network Firmware Update Tool and select the following Firmware Code Folders in theC:\Panasonic\Panasonic-FUP\Data folder, and then follow the display instructions to upgrade theMain Unit's Firmware Codes.Parent Firmware File Folder Sub Firmware File Folder Transferring Order\ DP-1520_1820_PU_xxxxxx \ SC_STD \ DP-LLNewAxVxxxxx_xx 1\ SC_PCL \ DP-LLNewBxVxxxxx_xx 1\ SC_PS \ DP-LLNewDxVxxxxx_xx 1\ SPC \ DP-LLNewSPCAxVxxxxxx 2When you select the Parent Folder, the followingFirmware Type window appears. Proper Sub File Foldersare selected automatically by selecting the FirmwareType.The transferring order is set up automatically.
