361SEP 2004Ver. 1.2DP-1520P/1820P/1820E8.9. Installing the Expansion F-ROM Board (DA-EM600)8.9.1. ContentsNote:1. The part number(s) may differ depending on the Destination.2. Refer to the Parts List in the Parts Manual.8.9.2. InstallationCAUTION!Turn the Power Switch on the Right Side of the machine to the OFF position, and thenunplug the AC Power Cord before beginning installation. (During a Lightning Storm, toprevent electrocution disconnect the Telephone Line Cable first before unplugging theAC Power Cord, if the Fax Option is installed.)Qty. Description Part No. Remarks1 Expansion F-ROM Board DZEC1021372 PC Board Support DZJH0000841 Installation Instructions DZSM000756 This document(1) Remove 10 Screws.(2) Remove the Rear Cover.(3) Remove the Black Pin Protector from Slot 1(CN62), if it was preinstalled.(4) Install 2 PC Board Supporters for the Slot 1 onthe SC PC Board.(5) Install the Program Expansion Board into Slot1 (CN62) on the SC PC Board and secure withthe Supporters.Note:The Program Extension F-ROM Board mustalways be installed into Slot 1 (CN62) for the PCLor PCL/PS Printer Option to function.(6) Proceed with the installation of other options.If finished, reinstall all Harnesses and Covers.(7) Plug the AC Power Cord and turn the PowerSwitch on the Right Side of the machine to theON position.(8) Reconnect the Telephone Line Cable if it wasdisconnected.
