PROBLEMSOLVING175Problem SolvingTroubleshootingIf You Have Any of These ProblemsMode Symptom Cause / Action PageDuring TransmissionDocument doesn'tfeed/multiple feeds1. Check that your document is free of staples and paperclips, and that it is not greasy or torn.2. Check that your document is the right type to send throughan ADF by consulting the list on "Originals You CannotSend". If your document has the characteristics listed, usethe Platen Glass instead.3. Check that the document is loaded properly.37Does not stamp Check Fax Parameter No. 004 and No. 028 settings. 33, 34Stamp too light Replace stamp or refill the ink. 179Transmission CopyQualityVertical lines on thetransmitted documentCheck own copy quality. If copy is OK, your machine has noproblem, report to the receiving party that they have aproblem. If copy is NG, clean the Scanning Area.--Transmitted documentis blankDuring Reception: Add Paper Replenish the recording paper. --Recording papermisfeedRemove the misfed paper.(See Operating Instructions (for Copier) page 58)--Recording paperdoesn't advance intomachineMake sure that there is paper in the Paper Tray(s). Follow theinstructions for loading paper.--Recording paperdoesn't eject afterprintingCheck to see if the recording paper has misfed inside of themachine.--Document autoreduction doesn't workCheck Print Reduction settings. 68: Add Toner Replace the Toner Cartridge. --: No Waste TonerBoxInstall the Waste Toner Box. --Continued on the next page...
