PROGRAMMING YOUR MACHINEPROGRAMMINGYOUR MACHINE33Fax Parameter TableNo. Parameter SettingNumber Setting Comments001 CONTRAST 1 Lighter Setting the home position for the CONTRAST.*4 Normal7 Darker002 RESOLUTION *1 Standard Setting the home position for the RESOLUTION.2 Fine3 S-Fine003 ORIGINAL *1 Text Setting the home position for the ORIGINAL.2 Text/Photo3 Photo004 STAMP *1 Off Setting the home position of the STAMP.To select the stamp function when the document is stored inmemory, see Fax Parameter No. 28.2 On005 MEMORY 1 Off Setting the home position for the MEMORY.*2 On006 DIALING METHOD 1 Pulse Selecting the dialing method.(Select Line-1 or Line-2 first, if you have the 2nd G3 FaxCommunication Port Kit installed)*2 Tone007 HEADER PRINT *1 Inside Selecting the printing position of the header.Inside : Inside TX copy area.Outside : Outside TX copy area.No print: Header is not printed.2 Outside3 No print008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.2 From To009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date & time,remote ID, percentage of reduction and page number on thebottom of each received document.2 Valid010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.*2 Soft3 Medium4 Loud012 COMM. JOURNAL 1 Off Selecting the home position for the printing mode of the COMM.Journal Off/Always/INC.Off : Does not printAlways : Always printsInc. Only : Prints only when communication has failed.2 Always*3 Inc. OnlyContinued on the next page...Customizing Your Machine
