Panasonic DVD-F85S Operating Instructions Manual

Getting startedRQT69776ConnectionBefore connection≥Disconnect the AC power supply cord.≥Turn off all equipment and read the appropriate operating instructions.≥The equipment connections described are examples.≥Peripheral equipment and optional cables sold separately unlessotherwise indicated.This page explains how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. To get the full benefitfrom the powerful multi-channel audio found on DVDs, you should connect an amplifier and speakers.Connection to a televisionAUDIOINLVIDEOINRAC INDIGITAL AUDIO OUT(PCM/BITSTREAM)AUDIO OUT COMPONENT VIDEO OUT(480P/480I)OPTICALLCENTERYRLRLRSUB-WOOFER SURROUND FRONTPBPR5 . 1 c h 2 c hVIDEO OUT S VIDEO OUTDo not place the unit on amplifiers or equipmentthat may become hot.The heat can damage the unit.TelevisionAudio/video cable(included)red white yellowred white yellowCOMPONENT VIDEO OUT terminalThese terminals can be used for either interlace or progressive output (➜ page 9)and provide a purer picture than the S VIDEO OUT terminal. Connection usingthese terminals outputs the color difference signals (PB /PR ) and luminance signal(Y) separately in order to achieve high fidelity in reproducing colors.Thedescription of the component video input terminals depends on the television ormonitor (e.g. Y/P B /P R, Y/B-Y/R-Y, Y/CB/C R). Connect to terminals of the samecolor.≥After making this connection, change the black level for a better picture.(➜ page 20, Video—Black Level Control)Video cable (not included)Television’sCOMPONENT VIDEOIN terminalsFor better picturesWhen making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.S video cable (not included)S VIDEO OUT terminalThe S video terminal achieves a more vivid picture thanthe VIDEO OUT terminal by separating the chrominance(C) and luminance (Y) signals. (Actual results dependon the television.)Television’sS VIDEO INterminalConnect your unit directly to your television.Do not connect the unit through your video cassette recorderwhen setting up your home entertainment system, becausethe picture may not be played correctly due to the copyguard.Basic connection to atelevisionYou can connect the audio cableto the 2-channel audio inputterminals of an analog amplifieror system component to enjoystereo or Dolby Pro Logic.∫ Power connectionConserving powerThis unit consumes a small amount of power, even when it is turned off(approx. 0.6 W).To save power when the unit is not to be used for a long time, unplug itfrom the household AC outlet.AC INAC power supply cord (included)Household AC outlet(AC 120 V, 60 Hz)