Panasonic DVD-H2000 Operating Instructions Manual

Also see for DVDH2000 - DIG. VIDEO DISCPLAYE: Service manual

Contents

Advanced operationsRQT574118TVCHTV/AVGROUPPAGESUBTITLESKIPSTOPCANCELHP-V.S.S.TEXTACTIONSP-V.S.S. AUDIOONLYREPEATMODE A-BREPEAT PLAYMODEANGLEPAUSE PLAYSLOW/SEARCHAUDIORETURNMARKERVOLPOWERPOWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENUDISPLAYTSILYALP1 2 34 5 67 8 90 10>=ENTER2·3·4CANCEL516, 5513·4PLAYMODEPLAYENTERENTER2 ENTERPLAY MODEENTER RETURN6 ∫ 1 5Choose a group and track, then press ENTER.No TimeGTotal Time0 Press PLAY to startTPlayClearClear all0:00PLAY MODERETURN6 ∫ 1 5Choose a group and track, then press ENTER.TimeTotal Time0 Press PLAY to startPlayClearClear all2:022:02No G1T1PLAY MODERETURN6 ∫ 1 5Choose a group and track, then press ENTER.TimeTotal Time0 Press PLAY to startPlayClearClear allNo G TPGM GROUP TRACKDVDAUDIOPGM GROUP TRACKDVDAUDIO52SELECT1SELECTENTER0:00SELECTENTER1 1Changing the play sequence[DVD-A] [VCD] [CD]Remote control onlyProgram playYou can select up to 32 tracks to play in the order you choose.1 While stoppedPress [PLAY MODE] until the programplay screen appears.2 Press [ENTER].3 [DVD-Audio\only]Move the joystick [3, 4] to select agroup and press [ENTER].³If you select bonus groups, you will have to enter a 4-digitpassword (➡ page 15).4 Move the joystick [3, 4] to select atrack and press [ENTER].Each time you move the joystick,1()2<- - - - - - ->ALL^-------------------------------------J³Repeat steps 2, 3 and 4 to program other tracks.³You can also select a group or track with the numberedbuttons.³“Total Time” tells you the total time of the programmedtracks.³All the tracks on a disc are selected when you select “ALL”(all the tracks in the selected group with DVD-Audio).5 Press [1] (play).Play now begins in the programmed sequence.To add or change tracks1. Move the joystick [3, 4] to select an available item.2. Repeat steps 2–4 to make the changes.To move to the page before or after the one shownPress [6] or [5].To clear the programmed tracks one by oneMove the joystick [3, 4] to select the item number (No) and press[CANCEL]. Alternatively, move the joystick [3, 4, 2, 1] to select“Clear” and press [ENTER].To clear the whole programMove the joystick [3, 4, 2, 1] to select “Clear all” and press[ENTER].The whole program is also cleared when the unit is turned off, or thedisc tray is opened.To exit the program modePress [PLAY MODE] while stopped until the program play screendisappears.³The program is retained in memory.NumberedbuttonsTrack No. Program No.e.g. DVD-AudioGroup No.