41 RQT6912 Advanced OperationsSpeaker settingYou need to change settings a, b, and cwhen you select “Multi-channel” in “SpeakerSetting” (you have connected 3 or morespeakers).≥When playing DVD-Audio, the unit may notoutput as set here due to limitations imposedby the unit or disc.∫ Speaker presence and size (a)1. Use [3, 4, 2, 1] to select the item and press [ENTER].2. Use [3, 4] to select the setting and press [ENTER].Icon examples: Surround speaker (L)Large: When the speaker supports low-frequency (under 100 Hz) reproduction.Small: Select when the speaker does not support low-frequency reproduction.The front speaker setting changes to “Large” if you change the subwoofer setting to “No”. Connectfront speakers that can reproduce the bass range below 100 Hz if you do not connect a subwoofer.∫ Delay time (b)(Effective when playing multi-channel discs)Place the speakers the same distance from the seating area for optimum surround sound. Changethe delay time if you have to place the center or surround speakers closer to the seating area.1. Use [3, 4, 2, 1] to select the delay time box and press[ENTER].2. Use [3, 4] to adjust the delay time and press [ENTER].ValuesIf distance A or B is greater than or equal to distance C, set to “0”. Ifdistance A or B is less than distance C, set as follows.≥Center speaker (A) ≥Surround speakers (B)a c b c aSETUPSELECTENTER RETURNmsmsdB0dBdBLExitTestLSRSWCRSdB00000a b a caacSurround (L) Surround (R)LS LSLarge Small No(R)(R)(L)(L)A CB Difference (Approx.)50 cm (11⁄2 feet)100 cm (3 feet)150 cm (5 feet)200 cm (6 feet)Setting1.3 ms2.6 ms3.9 ms5.3 msDifference (Approx.)200 cm (6 feet)400 cm (12 feet)600 cm (18 feet)Setting5.3 ms10.6 ms15.9 ms∫ Channel balance (c)1. Use [3, 4, 2, 1] to select “Test” and press [ENTER].1. A test signal is output from the front left speaker and proceeds clockwise.2. Use [3, 4] to adjust the volume of the center and surround speakers so they are the sameapparent volume as the front speakers (j3 dB to i3 dB).1. ≥The front speakers cannot be adjusted here.1. ≥No signal is output for the subwoofer. To adjust its volume, play something, then return to thisscreen to adjust to suit your taste.3. Press [ENTER].1. The test signal stops.When you are finishedUse [3, 4, 2, 1] to select “Exit” and press [ENTER].Front (L)Front (R)SubwooferCenterFront FrontSubwooferSurroundSurroundListeningPositionCenter