Panasonic DVD-RV41 Operating Instructions Manual

Also see for DVDRV31 - DIG. VIDEO DISCPLAYE: Operating instructions Operating instructions Operating instructions Operating instructions Service manual

25Advanced operationsRQT5869Digital output[DVD-RV41] [DVD-RV31]Refer also to “Common procedures” (á page 21) and the Audio menuin “Summary of initial settings” (á page 22).PCM Down ConversionNo (Factory preset):When you have connected an amplifier with audio cables.Yes:When you have connected an amplifier with an optical digital audiocable.Copyright protection limits digital output to 48 kHz/16 bit.When playing DVDs recorded in 96 kHzSound is output as follows in accordance with the connections andsettings you have made.¤1 The connected equipment must be able to handle 96-kHz LPCM inorder to take advantage of high quality audio found on these discs.Dolby DigitalBitstream (Factory preset):When you have connected a unit with a built-in Dolby Digital decoder.PCM:When you have connected a unit that doesn’t have a built-in DolbyDigital decoder.¤2DTS Digital SurroundOff (Factory preset):When you have connected a unit that doesn’t have a built-in DTSdecoder.¤2 (No digital signal is output.)Bitstream:When you have connected a unit with a built-in DTS decoder.MPEG[DVD-RV41][DVD-RV31] (For the United Kingdom, Continental Europe,Australia and N.Z.)PCM (Factory preset):When you have connected a unit that doesn’t have a built-in MPEGdecoder.¤2Bitstream:When you have connected a unit with a built-in MPEG decoder.¤2These changes to digital audio output must be made, other-wise bitstream signals the decoder cannot handle will be out-put. If these signals are output, “noise” will be output whichcan cause harm to your ears and speakers.Entering a password[DVD-RV41] [DVD-RV31]Refer also to “Common procedures” (á page 21) and the Disc menuin “Summary of initial settings” (á page 22).When setting ratings (When the level is 8)The password screen is shown when you select levels 0 to 7.1. Input a 4-digit password with the numbered buttons and press[ENTER].³If you enter a wrong number, press [CANCEL] to erase it beforeyou press [ENTER].The lock symbol appears closed to show the rating is locked.Do not forget your password.2. Press [ENTER] to confirm the 4 digits.When changing ratings (When the level is 0 to 7)The password screen is shown when you select “Ratings”.1. Input a 4-digit password with the numbered buttons and press[ENTER].2. Select the item with [3,4] and press [ENTER], and follow the on-screen instructions.Now, when you insert a DVD that exceeds the ratings limit youset, a message appears on the television.Follow the on-screen instructions.SETUPENTER RETURNEnter a 4-digit password,then press ENTER.Ratings✱✱✱✱PasswordSELECTSETUPENTER RETURNRatingsUnlock PlayerChange PasswordChange LevelTemporary UnlockSELECTConnectionSettingNoYesAnalogOutput as96 kHzConverted andoutput as 48 kHzDigitalNo output (If there is nocopyright protection, audio isoutput at 96 kHz.¤1)Converted and output as 48kHz/16 bit