Panasonic DVD-RV41 Operating Instructions Manual

Also see for DVDRV31 - DIG. VIDEO DISCPLAYE: Operating instructions Operating instructions Operating instructions Operating instructions Service manual

28RQT5869Home TheaterOPTICALRLAUX INOPTICALLRSUB-WOOFERAUDIO OUT VIDEOOUT S VIDEOOUTDIGITAL AUDIO OUT(PCM/BITSTREAM)OPTICALLRSUB-WOOFERAUDIO OUT VIDEOOUT S VIDEOOUTDIGITAL AUDIO OUT(PCM/BITSTREAM)»E Connecting an active subwoofer (optional)[DVD-RV31]You can enjoy more powerful bass by connecting an active subwoofer.Recording to MDs or cassette tapes[DVD-RV41] [DVD-RV31]OPTICALLRSUB-WOOFERAUDIO OUT VIDEOOUTDIGITAL AUDIO OUT(PCM/BITSTREAM)g Audio cableh To the subwoofer’sinput terminalHome Theater–Enjoying more powerful soundº Digital recordingYou can record the digital signal directly onto an MD.The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.Ensure the following conditions are met.³There is no copy guard recorded on the disc.³The recording equipment can handle a sampling frequency of48 kHz/16 bit.To make a digital recording1. Connect the recording equipment with an optical digital audiocable (á [D] above).2. When recording DVDs, change the digital audio output settings(á page 25).PCM Down Conversion: YesDolby Digital: PCMDTS Digital Surround: OffMPEG¤: PCM¤Only DVD-RV41 for all regions and DVD-RV31 for the UnitedKingdom, Continental Europe, Australia and N.Z.º Analog recordingYou can record to an MD or cassette tape. Using analog connectionmeans sound will be unaffected by the copy guards found on DVDs.To make an analog recording1. Connect the recording equipment with an audio cable (á [C]above).2. Set “Speaker Setting” to “2-channel” (á page 22). [DVD-RV41](If this is set to “Multi-channel”, only the audio for the front 2speakers will be recorded.)»C Connecting an analog amplifier orsystem component[DVD-RV41] [DVD-RV31]c Audio cable»D Connecting a digital amplifier orsystem component[DVD-RV41] [DVD-RV31]³Select “2-channel” (á page 22, Audio–Speaker Setting).[DVD-RV41]³Select “No” in “PCM Down Conversion” (á page 25).Adjust the settings to suit the equipment you have con-nected (á page 25).b (Red)(White)³Place the subwoofer as close as possible to the front cent-er.³Turn BASS PLUS on to boost the output from the subwoofer(á page 14).³Adjust the volume on the subwoofer to suit your preference.e Optical digitalaudio cableDo not bendwhen connecting.a Back of the unita Back of the unitTo enjoy Dolby Pro Logic³If you connect an amplifier with a Dolby Pro Logic decoder, you will also need to connect center and surround speakers to enjoysurround sound. Read the instructions for the equipment for connection details.³Turn Advanced Surround and Bass Plus off (á page 14). The Dolby Pro Logic decoder will not function correctly if Advanced Surroundand Bass Plus is on.d Amplifier orsystem component(Red)(White)f Insert fully, withthis side facingup.