Panasonic DVD-RV41 Operating Instructions Manual

Also see for DVDRV31 - DIG. VIDEO DISCPLAYE: Operating instructions Operating instructions Operating instructions Operating instructions Service manual

31ReferenceRQT5869“NO PLAY” appears on the unit’sdisplay.No on-screen display.GUI screens not displayed oronly partially displayed on thetelevision.The disc’s menu is displayed in adifferent language.No menu play.“CHECK THE DISC” appears onthe unit’s display.“H··” appears on the unit’sdisplay.·· stands for a number.“NO DISC” appears on the unit’sdisplay.Picture³The picture will be somewhat distorted at times: This is normal.³Ensure that the equipment is connected properly. 8³Make sure the television is on.³Ensure the television’s video input setting (e.g., VIDEO 1) is correct.³Go to the Video menu in the SETUP screen, and change “TV Aspect” to suit your television.You may also need to change the screen mode on the television itself. 9³Ensure that the unit is connected directly to the television, and is not connected through a videocassette recorder.DisplaysMaintenanceTo clean this unit, wipe with a soft, dry cloth.If the surfaces are extremely dirty, use a soft cloth dampened with a soap and water solution or a weak detergent solution.³Never use alcohol, paint thinner or benzine to clean this unit.³Before using chemically treated cloth, read the instructions that came with the cloth carefully.Picture distorted during search.No picture.The picture shown on thetelevision is not normal.(The sides of the picture are cutoff or black bands appear at thetop and bottom of the screen.)³You inserted a disc the unit cannot play; insert one it can. 5³Go to the Display menu in the SETUP screen, and select “On” for “On-Screen Messages”. F³Press [3,4] while the rightmost icon is highlighted to move them down. B³Go to the Disc menu in the SETUP screen, and select the preferred language for “Menus”. F³Menus are only displayed if they are recorded on the disc.³Disc is dirty. Wipe the disc clean. 6³Trouble is likely to have occurred. The number following “H” depends on the status of the unit.Reset procedure:Press [ê/I] to switch the unit to the standby mode and then back to ON.Alternatively, press [ê/I] to switch the unit to the standby mode, disconnect the AC mains lead,and then reconnect it.³If the service numbers fail to clear, note the service number and contact a qualified serviceperson.³You haven’t inserted a disc; insert one.³You haven’t inserted the disc correctly; insert it correctly.

/ 32

Related manuals for Panasonic DVDRV31 - DIG. VIDEO DISCPLAYE