Panasonic DVD-S35S Operating Instructions Manual

Also see for DVD-S31: Operating instructions Operating instructions

Contents

RQT693321 ReferencePicture PageSoundUnit displaysTelevision displaysClean this unit with a soft, dry cloth.≥Never use alcohol, paint thinner or benzine to clean this unit.The SETUP menus and otherscreens shown on the televisionare displayed incorrectly.Colors appear faded.≥The unit and television are using different video systems.[Units\for\the\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.]Use a multi-system or PAL television.[Units\for\other\areas]Use a multi-system or NTSC television.–No sound.Distorted sound.≥Check the connections.≥Check the volume on the equipment you have connected.≥Ensure that the input settings on the other equipment are correct.≥Turn Advanced Surround off if it causes distortion.≥Output from this unit will be in stereo (two channels) when Advanced Surround is on. Turn AdvancedSurround off if you are using three or more speakers.≥Press [1] (PLAY) to restore normal play after changing the speed.≥Noise may occur when playing WMA files.4, 5––151516–Piercing noise comes from thespeakers.≥If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,ensure you have selected the correct settings for “Dolby Digital”, “DTS Digital Surround” and“MPEG§” in the SETUP menus’ Audio menu.§For the Middle East, South Africa, Russia, Australia and N.Z.19Effects do not work. ≥Dialogue Enhancer and Advanced Surround do not work when the unit is outputting bitstreamsignals.≥Advanced Surround does not work if you have changed the play speed.–16“NoPLAY” ≥You inserted a disc the unit cannot play; insert one it can.≥You inserted a blank DVD-RAM.6–“CHECK DISC” ≥Disc is dirty: Wipe it clean. 6“H∑∑”∑∑ stands for a number.≥Trouble may have occurred. The number following “H” depends on the status of the unit.Reset procedure:Press [POWER Í/I] to switch the unit to the standby mode and then back to ON. Alternatively, press[POWER Í/I] to switch the unit to the standby mode, disconnect the AC power supply cord, and thenreconnect it.≥If the service numbers fail to clear, note the service number and contact a qualified service person.––“NoDISC” ≥You haven’t inserted a disc: Insert one.≥You haven’t inserted the disc correctly: Insert it correctly.–8“Cannot display group xx, picturexx”≥You are trying to display incompatible pictures. 11“The progressive out is set to“Disable””≥Go to Video in the SETUP menus, and select “Enable” in “Progressive Out (Component)”. 18No on-screen display or onlypartially displayed.≥Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”.≥Press [DISPLAY], and press [2, 1] to highlight the Bar Position icon, then press [3, 4] to adjust theposition.1816The disc’s menu is displayed in adifferent language.≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”. 18MaintenanceManufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-widepatents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000Digital Theater Systems, Inc. All rights reserved.Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual propertyrights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by MacrovisionCorporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverseengineering or disassembly is prohibited.

/ 24

Related manuals for Panasonic DVD-S31