Panasonic DVD-S35S Operating Instructions Manual

Also see for DVD-S31: Operating instructions Operating instructions

Contents

Getting startedRQT69334AccessoriesPlease check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.(Only for U.S.A.) To order accessories contact 1-800-332-5368 or the website (http://www.panasonic.com).(For other areas) To order accessories, call the dealer from whom you have made your purchase.∏ 1 Remote controlU.S.A. and Canada (EUR7621010)Other areas (EUR7621020)∏ 1 AC power supply cordU.S.A. and Canada (RJA0065-2D)Australia and N.Z. (RJA0035-2X)Other areas (RJA0019-2X)∏ 1 Audio/video cable (JAC3315N)∏ 2 Remote control batteriesFor units with PX printed on the outer packaging∏ 1 Power plug adaptor (VJP2974)[Note]The included AC power supply cord is for use with this unit only. Do notuse it with other equipment.Before connection≥Disconnect the AC power supply cord.≥Turn off all equipment and read the appropriate operating instructions.≥The equipment connections described are examples.≥Peripheral equipment and optional cables sold separately unlessotherwise indicated.ConnectionConnection to a televisionAC INOPTICALL PB YP RRDIGITAL AUDIO OUT(PCM/BITSTREAM)COMPONENT VIDEO OUT(480P/480I)AUDIO OUTVIDEO OUT S VIDEO OUTAUDIOINLRVIDEOINTelevisionAudio/video cable(included)red white yellowBasic connection to a televisionCOMPONENT VIDEO OUT terminal≥These terminals can be used for either interlace or progressive output (➜ page 7)and provide a purer picture than the S VIDEO OUT terminal. Connection usingthese terminals outputs the color difference signals (PB /PR ) and luminance signal(Y) separately in order to achieve high fidelity in reproducing colors.The descriptionof the component video input terminals depends on the television or monitor (e.g.Y/PB /P R, Y/B-Y/R-Y, Y/C B /CR). Connect to terminals of the same color.[Units\for\the\U.S.A.,\Canada\and,\with\PX\printed\on\the\outer\packaging]≥After making this connection, change the black level for a better picture.(➜ page 18, Video—Black Level Control)Video cable (not included)Television’sCOMPONENT VIDEOIN terminalsFor better picturesWhen making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.S video cable (not included)S VIDEO OUT terminalThe S video terminal achieves a more vivid picture thanthe VIDEO OUT terminal by separating the chrominance(C) and luminance (Y) signals. (Actual results dependon the television.)Television’sS VIDEO INterminalThis page explains how to connect the unit to a television and set itup so you hear the audio through the television’s speakers.To get the full benefit from the powerful multi-channel audio found onDVDs, you should connect an amplifier and speakers.Do not place the unit onamplifiers or equipmentthat may become hot.The heat can damage the unit.Connect your unit directly to your television.Do not connect the unit through your video cassette recorder whensetting up your home entertainment system, because the picture maynot be played correctly due to the copy guard.red white yellow