Panasonic DVD-S52 Operating Instructions Manual

Also see for DVD-S52: Owner's manual Operating instructions Operating instructions

RQT87068STEP 1 ConnectionTurn on the television and select the appropriate video input on the television.To change these settings later, select “QUICK SETUP” (➜ page 21, “Others” tab).Please connect directly to TV.P RP BRL YDIGITAL AUDIO OUT(PCM/BITSTREAM)RLPlease connect directly to TV.yOPTICALP RP BYCOAXIAL INOPTICAL INAmplifier with a built-indecoder or a decoder-amplifier combinationCoaxial cable∫ Enjoying multi-channel surround soundwith COAXIAL IN or OPTICAL INSet “Audio Output” to “Off” (➜ page 21, “HDMI” tab), and change “PCM DigitalOutput”, “Dolby Digital” and “DTS Digital Surround” (➜ page 21, “Audio” tab).Optical digital audio cableDo not bend sharply whenconnecting.≥You cannot use DTS Digital Surround decoders not suited to DVD.≥Even if using this connection, output will be only 2 channels when playing DVD-Audio.To enjoy multi-channel surround sound, connect with HDMI terminals (➜ page 7).Back of the unit∫ Connect the AC power supply cord lastTo household AC outlet (AC 120 V, 60 Hz)AC power supply cord (included)Conserving powerThis unit consumes a small amount of power even when it is turned off (1 W). To savepower when the unit is not to be used for a long time, unplug it from the household ACoutlet.AC INorSTEP 2 The remote control∫ Batteries ≥ Insert so the poles (i and j) match those in the remote control.≥ Do not use rechargeable type batteries.Do not:≥ mix old and new batteries.≥ use different types at the same time.≥ heat or expose to flame.≥ take apart or short circuit.≥ attempt to recharge alkaline or manganese batteries.≥ use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakage which candamage items the fluid contacts and may cause a fire.Remove if the remote control is not going to be used for a long periodof time. Store in a cool, dark place.∫ UseAim at the remote control sensor (➜ page 9), avoiding obstacles, at amaximum range of 7 m (23 feet) directly in front of the unit.R6/LR6, AASTEP 3 QUICK SETUP1 2 3 4 5Power ON. Shows QUICKSETUP screen.Follow the messageand make the settings.Press to finishQUICK SETUP.Press to exit.ADVANCEDDISC REVIEWAVENHANCERFL SELECT QUICK OSDADVANCEDSURROUNDH.BASSFUNCTIONSSUBTITLE AUDIO ANGLE/PAGE SETUPPLAY MODE PLAY SPEED ZOOM GROUPRETURNENTERNIGHTSOUNDDIRECTTOP MENUNAVIGATORPLAY LISTMENUSETUP RETURNENTER ENTER SETUPConnection /The remote control/QUICK SETUP