Getting startedVQT4W6820Settings6 Set “Quick Start” to “On”, “Off” or “TimerSetting for Quick Start”, then press [OK].When “Easy Setting has been completed.”appears, Easy Setting is complete.• Select “Yes” to proceed to “Easy NetworkSetting”. (> 21)• Select “No” to finish the Easy Setting.To stop partwayPress [BACK/RETURN ].To restart setup1 Press [FUNCTION MENU]. (> 18)2 Select “Setup” in “Others”, then press [OK].3 Select “Auto Setup” in “Tuning”, then press[OK].4 Select “Yes”, then press [OK].To display the Owner ID information on TV1 While the unit is on, press and hold [OK], theyellow button and the blue button on theremote control at the same time for more than5 seconds.- “00 RET” is displayed on the unit’s display.2 Repeatedly press [1] (right) on the remotecontrol until “01 OID” is displayed on the unit’sdisplay.3 Press [OK] on the remote control.The PIN is not displayed.To confirm that channels have been tunedcorrectlyRefer to “Using Channel List”. (> 24)To change PIN for parental controlRefer to “PIN Entry”. (> 94)To change the region for Channel SortingRefer to “Channel Sorting by Region”. (> 84)• If tuning is cancelled partway through, it may not bepossible to receive the channels. Restart setup again.• OnIt is possible to start quickly from standbymode.• OffPower consumption in standby mode isminimized. (> 110)However, startup time from standby modewill be longer.• Timer Setting for Quick Start“Quick Start” is activated when the set timecomes. (If the clock has not been set, thisfunction is not activated at all hours.)Quick StartOnOffTimer Setting for Quick Start 6:00 23:00
