Convenient functionsVQT4W68 91NetworkEasy Network SettingPress [OK] to start Easy Network Setting. (> 21)Network SettingsLAN Connection ModeSelect the LAN connection method.Wireless SettingsThis allows to set and check the connectionsettings of the Wireless router.1 Encryption type2 Reception3 Type of wireless routerConnection SettingThe Wireless router connection wizard willbe displayed.Double Speed Mode Setting ( 2.4GHz )When a 2.4 GHz wireless format is used,this setting sets the connection speed.• If you connect using the “Double SpeedMode (40MHz)”, 2 channels use thesame frequency band, and there isconsequently a greater risk of receptioninterference. This can cause theconnection speed to drop or theconnection to become unstable.Wireless SettingsDouble Speed Mode Setting ( 2.4GHz )Connection SettingCurrent connection settingsThe current connection settings and status aredisplayed.Connection statusCurrent statusNetwork name( SSID )Wireless type 802.11n (2.4GHz/20MHz)Authentication typeEncryption type AESConnectedReception e.g.,IP Address / DNS SettingsCheck the connection of the network or setthe IP address and DNS.• To set the IP address and DNS1 Set “IP Address Auto-assignment” and“DNS-IP Auto-assignment” to “Off”.2 Select the item, then press [OK] to showthe respective setting.• When the router’s DHCP server function isnot activated, check the numbers of otherconnected devices such as personalcomputers, then assign a number differentfrom those of other devices for the “IPAddress” and assign the same number for“Subnet Mask” and “Gateway Address”.Proxy Server SettingsCheck and set the connection to the Proxyserver.• Press [OK] to show the respective setting.Network Service SettingsLockYou can restrict using VIERA Connect.• PIN is required to change. (> 24)Automatic Volume ControlVolume is adjusted automatically to thestandard volume while using VIERAConnect.• Depending on contents, this function willnot work.• Select “Off” when the audio is warped.