Panasonic Diga DMR-BWT735 Operating Instructions Manual

Contents

Editing videoVQT4W68 49To cancel a “Now” conversionPress and hold [BACK/RETURN ] for morethan 3 seconds.To confirm whether the conversion iscompletedPress [DIRECT NAVIGATOR].e.g.,When “±± > ±± (Recording mode forconversion)” is displayed, the conversion has notfinished.To cancel a “During standby” conversionAfter performing steps 1–3 (> 46)1 Select “File Conversion” in “Edit”, then press[OK].2 Select “Yes”, then press [OK].• To use “File Conversion”, the HDD needs enough storagecapacity.• The size of converted title might increase depending on thetitle.• File Conversion is stopped when this unit is turned onduring performing “During standby” conversion. Conversionwill start from the beginning again once the unit is switchedto standby mode.• When converted, the audio content and subtitle languagewill be selected according to the following settings:- “Multi Audio” of “Preferred Multi Audio” (> 85)- “Subtitles” of “Preferred Subtitles” (> 85)- Audio for HG / HX / HE / HL / HM Recording (> 89)• When converted, 3D information may not be retained.• In titles with the Auto Renewal Recording function (> 33)set, a programme may be unintentionally converted while in“During standby”.[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]1 Select “Chapter View”, then press [OK].2 Perform the editing operations.Playback from Chapter ViewRefer to “Playback from Chapter View”. (> 38)• The maximum number of chapters:(Depends on the state of recording.)[HDD] [USB_HDD]: Approx. 1000 per title[BD-RE] [BD-R] [RAM]: Approx. 1000 per disc• [HDD] [USB_HDD] When the title has the maximum number ofchapters, you cannot perform the Resume play function(> 36) or the “Changing thumbnail” (> 47) with the title.Start TimeProg.Type:Rec TimeChannel Date Title Name TitlesMovie9:00 1h00m (DR HL)////Editing chaptersEdit Chapter Mark:Select the point where you want to start a newchapter while viewing the title.1 Press the green button.2 Press [OK] at the point you want to divide.• Repeat this step.3 Press [BACK/RETURN ] to go toChapter View screen.To delete the chapter:1 Select the chapter, then press [DEL].Multiple editingSelect the chapter, then press the yellowbutton.A check mark is displayed. Repeat thisstep.• Press the yellow button again to cancel.2 Select “Delete”, then press [OK].To combine chapters (Delete chaptermark):1 Select the chapter, then press [OPTION].2 Select “Combine Chapters”, then press[OK].3 Select “Combine”, then press [OK].The selected chapter is combined to thenext chapter.