24RQT9075Advanced timer recording1 Press [PROG/CHECK].2 Press [3, 4] to select “New TimerProgramme” and press [OK].3 Press [1] to move through the itemsand change the items with [3, 4].≥Press and hold [3, 4] to alter the Start (Start time) andStop (Finish time) in 30-minute increments.≥You can also set Name (Programme position/TV StationName), Date, Start (Start time), and Stop (Finish time) withthe numbered buttons.≥DateTitles recorded using the same daily or weekly timer arebundled and displayed as a “group” in the Direct Navigatorscreen (➡ 27) except when using Auto Renewal Recording.≥You can also press [DRIVE SELECT] to select the recordingdrive.When the recording drive is “DVD” and there is not enoughremaining space, recording automatically switches to the“HDD” (➡ 25, Relief Recording).≥You can also press [REC MODE] to change the recordingmode.≥[HDD] RENEW (Auto Renewal Recording) (➡ 25)ON!)OFF≥Programme NamePress [2, 1] to select “Programme Name” and press [OK].(➡ 42, Entering text)4 Press [OK].The timer programme is stored and the timer icon is displayed.“F” lights on the unit’s display to indicate timer recordingstandby has been activated.Repeat steps 2–4 to programme other recordings.Press [Í DVD] to turn the unit off.1 While the unit is onPress [DRIVE SELECT] to select therecording drive and press [∫].2 Press [2, 1] to select “StopRecording” and press [OK].If you stop a timer recording, it will be cancelled. However, ifyou have set a weekly or daily timer recording, the recordingwill start from the next time the timer recording is set.Even when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press the “Red” button.≥The timer icon “F” (➡ 25) disappears from the timerrecording list.≥You cannot cancel timer recording standby mode as long aseven one timer icon “F” (➡ 25) remains in the timerrecording list.≥Press the “Red” button again to activate timer recordingstandby.≥When a timer recording is set, DVDs that were recorded using adifferent TV system cannot be played unless the TV system ischanged in the Setup menu (➡ 60) or the timer recording hascompleted or has been cancelled.≥Timer recordings are activated regardless of whether the unit isturned on/off.≥Timer recordings begin when the set time is reached even whenplaying.≥Timer recordings do not begin while editing or copying in normalspeed mode (➡ 43).≥If the unit is turned on when timer recording begins, it remainsturned on after recording finishes. It does not turn off automatically.You can turn the unit off during timer recording.≥If the unit is not put in the timer recording standby mode at the last10 minutes before the programmed timer recording starting time,the “F” flashes on the unit’s display.≥When you programme successive timer recordings to startimmediately one after the other, the unit cannot record the part atthe beginning of the later programmes.≥If the actual broadcasting times of timer recordings overlap, therecording that starts first always has priority, and the recording ofthe later programme will start only after the first timer recording hasfinished.Manually programming timerrecordings[.llla.Date: Current date up to one month later minusone day;:Daily timer: SUN-SAT>MON-SAT>MON-FRI;:Weekly timer: SUN>--->SATTimerRecording 1:58 SPDVD30:24 SPHDDRemainTUE 14.10.08. 12:53:00ModeStopStartNo. Date HDDDVDHDDName DrivespaceSP OK20:0019:00ARD 15. 7. TUE01New Timer ProgrammeTimerRecording 1:58 SPDVD30:24 SPHDDRemainTUE 14.10.08. 12:54:00ModeStopStartName Date HDDDVD22:3022:0015. 7. TUE HDD1 ARDProgramme NameSPNo. NameARD01Timer iconTUE 14.10.08 12:56:00ModeStop HDDDVDHDDDrivespaceSP OK20:00ProgrammeCheck to make sure “OK”is displayed (➡ 25).To cancel recording when recordinghas already begunTo release the unit from recordingstandbyNotes on timer recordingStop RecordingStop Recording CancelTimer recording in progress.Stop this timer recording?It will be cancelled if you stop.OK RETURNSELECTProgramme ProgrammeRecorded RecordedNot recorded