4RQT9306Included accessoriesGetting started∫ Batteries≥Insert the poles (i and j) so to match in the remote control.≥Use alkaline or manganese batteries.≥Do not mix old and new batteries.≥Do not use different types at the same time.≥Do not heat or expose to flame.≥Do not leave the battery(ies) in an automobile exposed to directsunlight for a long period of time with doors and windows closed.≥Do not take apart or short circuit.≥Do not attempt to recharge alkaline or manganese batteries.≥Do not use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakage which candamage items the fluid contacts and may cause a fire.Remove if the remote control is not going to be used for a longperiod of time. Store in a cool, dark place.Remote control operations (> 6)∫ UseSet the unit up on an even surface away from direct sunlight, hightemperatures, high humidity, and excessive vibration. Theseconditions can damage the cabinet and other components, therebyshortening the unit’s service life.Do not place heavy items on the unit.Do not use high voltage power sources. This can overload the unitand cause a fire.Do not use a DC power source. Check the source carefully whensetting the unit up on a ship or other place where DC is used.Ensure the AC mains lead is connected correctly and notdamaged. Poor connection and lead damage can cause fire orelectric shock. Do not pull, bend, or place heavy items on the lead.Grasp the plug firmly when unplugging the lead. Pulling the ACmains lead can cause electric shock.Do not handle the plug with wet hands. This can cause electricshock.Do not let metal objects fall inside the unit. This can cause electricshock or malfunction.Do not let liquids get into the unit. This can cause electric shock ormalfunction. If this occurs, immediately disconnect the unit from thepower supply and contact your dealer.Do not spray insecticides onto or into the unit. They containflammable gases which can ignite if sprayed into the unit.Do not attempt to repair this unit by yourself. If sound isinterrupted, indicators fail to light, smoke appears, or any otherproblem that is not covered in these instructions occurs, disconnectthe AC mains lead and contact your dealer or an authorized servicecentre. Electric shock or damage to the unit can occur if the unit isrepaired, disassembled or reconstructed by unqualified persons.Extend operating life by disconnecting the unit from the powersource if it is not to be used for a long time.Please check and identify the supplied accessories.(Product numbers correct as of April 2009. These may be subject to change.)∏(N2QAYB000343)∏ ∏ ∏ ∏1 Remote control 1 AC mains leadFor use with this unit only. Do notuse it with other equipment.Also, do not use cords for otherequipment with this unit.1 RF coaxial cable 2 Batteriesfor remote control1 Audio/Video cableThe remote control informationR6/LR6, AA30203020Remote control signal sensor7 m directly in front of the unitSafety precautionsPlacementVoltageAC mains lead protectionForeign matterService