Panasonic Diga DMR-EX79 Operating Instructions Manual

Also see for Diga DMR-EX79: Operating instructions Operating instructions Operating instructions

Contents

54RQT9306Using on-screen menus/Status messageSetting menus1 Press [DISPLAY].≥Depending on the condition of the unit (playing, stopped,etc.) and disc contents, there are some items that youcannot select or change.2 Press [3, 4] to select the menu andpress [1].3 Press [3, 4] to select the item andpress [1].4 Press [3, 4] to select the setting.≥Some items can be changed by pressing [OK].To clear the on-screen menusPress [DISPLAY].§ With some discs, you may only be able to make changes usingthe menus (> 15) on the disc.≥The display changes according to the disc content. You cannotchange when there is no recording.Audio attributeLanguageThis function works only when the elapsed play time is displayed.Select the item for repeat play. Depending on the disc, the items thatcan be selected will differ.§ Only when you have set “Progressive” to “On” in the Setup menu(> 63).Using on-screen menusCommon proceduresDisc menu—Setting the disc contentSoundtrack§[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]The disc’s audio attributes appear.[DVD-V]Select the audio and language (> right, Audio attribute,Language).DivXSelect the soundtrack number.≥Soundtrack numbers are displayed even when there is only oneaudio type.Subtitle§[DVD-V]Turn the subtitle on/off and select the language (> right,Language).[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] (Onlydiscs that contain subtitle on/off information)Turn the subtitle on/off.≥Subtitle on/off information cannot be recorded using this unit.DivXTurn the subtitle on/off and select “Text” or the subtitle number.≥“Text” or subtitle numbers are displayed even if there are notmultiple subtitles.Angle§ [DVD-V]Change the number to select an angle.Audio channel [HDD] [RAM] [-RW‹VR›] [VCD] and DivX(> 28, Changing audio during play)Source Select (DivX)≥Automatic:The constructing method of the DivX contents isautomatically distinguished and output.≥Interlace:Select when the disc contents were recorded using interlace.≥Progressive:Select when the disc contents were recorded usingprogressive.PBC (Playback control > 81) [VCD]Indicates whether menu play (playback control) is on or off.DiscPlayPictureSoundSoundtrackSubtitle1Audio channelOffL RDigital 2/0 chOtherMenu Item SettingSignal typek (kHz):b (bit):ch (channel):Sampling frequencyNumber of bitsNumber of channelsENG:FRA:DEU:ITA:ESP:NLD:SVE:NOR:EnglishFrenchGermanItalianSpanishDutchSwedishNorwegianDAN:POR:RUS:JPN:CHI:KOR:MAL:VIE:DanishPortugueseRussianJapaneseChineseKoreanMalayVietnameseTHA:POL:CES:SLK:HUN:FIN:¢:ThaiPolishCzechSlovakHungarianFinnishOthersPlay menu—Change the play sequenceRepeat Play≥All≥Chapter≥Group≥PL (Playlist)≥Title≥Track[CD] [VCD][HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL][+RW] [DVD-V] [-RW‹VR›]MP3/WMA (except [USB])[HDD] [RAM] [-RW‹VR›][HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL][+RW] [DVD-V] [-RW‹VR›][CD] [VCD] and MP3/WMA (except [USB])Select “Off” to cancel.Picture menu—Change the picture qualityPlayback NRReduces noise and picture degradation.Progressive§ (> 81)Select “On” to enable progressive output.Select “Off” if the picture is stretched horizontally.Transfer§ [When “Progressive” (> above) is set to “On”.]Select the method of conversion for progressive output to suitthe type of title being played (> 81, Film and video).When the output signal is PAL(When the tray is opened, the setting will return to “Auto”.)≥Auto:≥Video:≥Film:Automatically detects the film and videocontent, and appropriately converts it.Select when using “Auto”, and the content isdistorted.Select this if the edges of thefilm content appear jagged orrough when “Auto” is selected.However, if the video contentis distorted as shown in theillustration to the right, thenselect “Auto”.When the output signal is NTSC≥Auto 1(normal):≥Auto 2:≥Video:Automatically detects the film and videocontent, and appropriately converts it.In addition to “Auto 1”, automatically detectsfilm contents with different frame rates andappropriately converts it.Select when using “Auto 1” and “Auto 2”, andthe content is distorted.Input NRReduces the noise while recording (Except analoguechannels).≥Automatic:Noise reduction only works on picture input from a videotape.≥On:Noise reduction works for input video.≥Off:Noise reduction is off. You can record the input signal as it is.LPCM/ Digital/DTS/MPEG: