Panasonic Diga DMR-EX79 Operating Instructions Manual

Also see for Diga DMR-EX79: Operating instructions Operating instructions Operating instructions

Contents

64RQT9306Changing the unit’s settings(All factory default settings are indicated with underlined text.)§1 The timer recording programmes are also cancelled.§2 Recordings on the HDD will not be deleted.OthersRemote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.[DVD 1] [DVD 2] [DVD 3]Use “DVD 1”, the factory set code, under normal circumstances.1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].∫ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remotecontrol to match the main unit’s(> step 2).Executing “Shipping Condition” in the Setup menu returns the mainunit code to “DVD 1”. Change the remote control code to 1(> step 2).ClockThis unit usually obtains time and date information from digitalbroadcasts and automatically corrects the time several times aday. However, if the time is not set correctly, use the settings listedin the method below.1 Press [3, 4] to select “Off” of “Automatic” and press[OK].2 Press [2, 1] to select the item you want to change.The items change as follows:Hour!#Minute!#Second!#Day!#Month!#Year^-----------------------------------------------------------------------------------------JReset the clock regularly to maintain accuracy.(Monthly accuracy +/– 15 seconds.)3 Press [3, 4] to change the setting.You can also use the numbered buttons for setting.4 Press [OK] when you have finished the settings.The clock starts.If a TV station transmits a time setting signal, and when“Automatic” in the Clock setting menu is set to “On”, the automatictime correction function checks the time and if necessary it isadjusted several times every day.∫ To change the region1 Press [3, 4] to set “Automatic” to “On” and press [OK] in step1.2 Press [3, 4] to select the correct region and press [OK].Auto clock setting starts. This takes a few minutes.“Automatic clock setting completed.” screen is displayed.3 Press [RETURN ] to exit the screen.SetupTuningRemote ControlPress “” and “OK” togetherfor more than 5 seconds on the remotecontrol.DiscPictureNoteClockTimeAutomatic Region SelectionDate15 : 45 : 39 11 . 12 . 2009Off QueenslandPlease set the clock.OK: access RETURN: leaveOK RETURNCHANGEe.g., This screen appearswhile receiving a digitalbroadcast.NoteSetting for Standby≥Press [OK] to show the following settings.Power Save[On] Power consumption is minimized when the unit is turnedto standby (> 80).[Off] This sets to Quick Start Mode.≥Refer to the chart for the Power Save function features (> 9)when the unit is turned off.Auto StandbySet the time to automatically turn the unit off.After the unit has finished operating, the unit will be turned offonce the set time has passed.[2 hours] [4 hours] [6 hours][Off] The unit will not automatically turn off.DivX RegistrationYou need this registration code to purchase and play DivX Video-on-Demand (VOD) content (> 31).System UpdateIn order to update this unit’s software, the TV Guide download, andto support system changes made by broadcasts, this unitperiodically performs software updates.Press [OK] to show the following settings.≥Update data and TV Guide download information are sent by anunscheduled digital broadcast. In order to receive these updates,you must be able to receive digital broadcasts.≥An update will take approximately 60 minutes. While the updateis in progress, “SW-DL” appears on the unit’s display. You cannotoperate the unit until the update is complete. Removing the ACmains lead while the update is in progress may damage the unit.≥TV Guide download will take approximately 60 minutes. Whilethe TV Guide download is in progress, “GUIDE” appears on theunit’s display. The TV Guide download can be interrupted byswitching on the unit.TV Guide Download in Standby[On] When you set this unit to standby mode, TV Guide data isdownloaded automatically.[Off]Software Update in Standby[On] When you set this unit to standby mode, softwareupdates are downloaded automatically.[Off]TV Guide/Software search periodSelects the time to automatically perform TV Guide downloadand updates when the unit is set to standby mode. This can onlybe set when “TV Guide Download in Standby” and “SoftwareUpdate in Standby” is set to “On”.≥If there is a programmed recording set for the time you haveselected, the programmed recording will be given priority.[Automatic] The unit will give priority to searching for TVGuide download and update data at midnight.[02:00–06:00] [06:00–10:00] [10:00–14:00][14:00–18:00] [18:00–22:00] [22:00–02:00]Software Update Search NowStart the search for new software manually.A new software version is announced by a message. Do not turnyour unit off during the update. This could result in the loss ofdata. A message shows that the update has finished.≥If applicable update data is found, press [2, 1] to select “Yes”and press [OK].Initialize≥Press [OK] to show the following settings.Shipping Condition§1§2All the settings except for the ratings level, ratings password, andclock settings return to the factory preset.[Yes] [No]Default Settings§1§2All the settings other than the tuning settings, clock settings,region settings, disc language settings, ratings level, ratingspassword, remote control code, return to the factory presets.[Yes] [No]