Panasonic Diga DMR-EX99V Operating Instructions Manual

Contents

12VQT2J46STEP 2 Channel reception settings and TV aspect settings1 Turn on the television and select theappropriate AV input to suit theconnections to this unit.2 Press [Í] to turn the unit on.When connecting to a television that has the VIERA Link or QLink functions (> 46), downloading from the television starts.You can download the tuning positions from the television forthe channels in this unit’s channel coverage.“DVB Auto-Setup” starts.The unit will search for the terrestrial digital channels. TVchannels will be located and stored ready for use.This takes 5-10 minutes.3 Press [3, 4] to select “Ein”, “Aus” or“Zeitauswahl” and press [OK] whenthe “Energiesparmodus” settingmenu appears.The features of the Power Save in Standby function whenthe unit is in standby mode are as below.§1 “Unit’s Display” is set to “Automatic” in the Setup menu.(> 76)§2 It is possible to startup and start recording within severalseconds.– Depending on the type of TV or the connected terminal, itmay take time to display the screen.§3 When “RF OUT ( Aerial Signal )” is set to “Off” in theSetup menu (> 79)If the TV aspect setting screen appears on thetelevision.Press [3, 4] to select the TV aspect and press [OK].≥16:9:When connected to a 16:9 widescreen television.≥Pan & Scan:When connected to a 4:3 aspect television,side picture is trimmed for 16:9 picture(> 96).≥Letterbox:When connected to a 4:3 aspect television.16:9 picture is shown in the letterbox style(> 96).When television picture appears, set up is complete.If the confirmation screen of GUIDE Plus+ data downloadappears, perform the following steps.(For information about GUIDE Plus+ system > 13)4 Press [2, 1] to select “Ja” and press[OK].5 Press the numbered buttons or[3, 4, 2, 1] to enter your postalcode and press [OK].GUIDE Plus+ data download starts. This takes about 30 minutes.6 When the download has finishedPress [OK].Set up is complete.To stop partwayPress [RETURN ].If the Country setting menu appears on the television.Press [3, 4] to select the country and press [OK].The “Aktive Antenne” setting menu appears.Press [3, 4] to select “Ein” or “Aus” and press [OK].When using indoor antenna that is not equipped with powersupply, select “Ein”.If the Auto setup menu appears on the television.Press [3, 4] to select “Digitale & analoge Sender” or“Digitale Sender” and press [OK].≥Digitale & analoge Sender(Digital & Analogue channels):Perform the analogue Auto-Setup after performing the DVBAuto Setup.≥Digitale Sender (Digital channels):Perform the DVB Auto Setup. (analogue Auto-Setup is notperformed)Ein(On):It will go into the Power Save in Standby modewhen the unit is in standby mode.Aus(Off):It is possible to start quickly from the standby mode.(Quick Start mode)Zeitauswahl (On Timer):Press [3, 4, 2, 1] to set the start and stop timeand then press [OK].≥“Energiesparmodus” is set to activate during thesetting time period.MANUAL SKIPSTOP PAUSE PLAYINPUTSELECT0987654321CHCHTRACKING/V-LOCK/PAGEShowViewPROG/CHECKSKIP/INDEX REW FFSLOW/SEARCHPAUSE LIVE TVRESETVOLAVDRIVESELECTTVSTATUS EXITOPTION RETURNDELETEOKDIRECTNAVIGATORFUNCTIONMENUGUIDEOK,,,OK0987654321RETURNFUNCTIONMENUFUNCTIONMENUNumberedbuttonsDVB Auto-SetupSuchlauf Kan 5 69Kanal QualitätSendername TypABCABC 212TVDaten99EnergiesparmodusEnergiesparmodus EinBis 6 :00Von 0 :00Minimiert Stromverbrauch im Standby-Modusd h D k i i d S h llEnergiesparmodus(Power Save inStandby)Activated (Ein /Zeitauswahl )§1Deactivated( Aus )Power consumption Approx. 0.5 W§3 Approx. 16 WStartup time Not Quick Quick§2Watching the picture(e.g. Pay TV) from thedevice connected to AV2Cannot do Can do∫ If the clock setting menu appearsSet the clock manually (> 78).∫ To confirm that stations have been tunedcorrectly (> 74)∫ To restart set up (> 73)∫ Settings of the TV Guide for Analoguebroadcasts (> 13)On screen messages are not displayed in English. Aftercompleting step 6, change the on-screen display to English inthe following steps.1 Press [FUNCTION MENU].2 Press [3, 4] to select “Weit. Funktionen” / “Autres” /“Altre funzioni” / “Otras” and press [OK].3 Press [3, 4] to select “Setup” / “Configuration” / “Impostazioni” /“Configuración” and press [OK].4 Press [3, 4] to select “Display” / “Affichage” and press [1].5 Press [3, 4] to select “Sprachauswahl” / “Langue” / “Lingua” /“Idioma” and press [OK].6 Press [3, 4] to select “English” and press [OK].7 Press [EXIT].PostleitzahlGewähltes Land : XXXXXXDieses Gerät aktualisiert dieGUIDE Plus+ Datenmehrmals pro Tag.CHANGE