Panasonic Diga DMR-EX99V Operating Instructions Manual

Contents

33VQT2J46Advancedoperations1 Press [PROG/CHECK].2 Press [3, 4] to select “New TimerProgramme” and press [OK].3 Press [2, 1] to move through theitems and change the items with[3, 4].≥When “Channel” is selected, you can press the “Blue” buttonto change the category [e.g., TV, Radio, Favourite (> 73)]and then press [3, 4] to select the channel you want torecord.≥Press and hold [3, 4] to alter the Start (Start time) and Stop(Finish time) in 30-minute increments.≥You can also set Channel (Programme position/TV StationName), Date, Start (Start time), and Stop (Finish time) withthe numbered buttons.≥DateTitles recorded using the same daily, weekly or series timerare bundled and displayed as a “group” in theDIRECT NAVIGATOR screen (> 39) except when usingAuto Renewal Recording.≥You can also press [DRIVE SELECT] to select the recordingdrive.When the recording drive is “DVD” and there is not enoughremaining space, recording automatically switches to the“HDD” (> 34, Relief Recording).≥You can also press [REC MODE] to change the recordingmode.≥[HDD] RENEW (Auto Renewal Recording) (> 34)ON!)OFF≥Programme NamePress [2, 1] to select “Programme Name” and press [OK].(> 49, Entering text)≥STTL (Subtitles) (Digital broadcast only)AUTO!)OFFWhen the “Channel” column is set in AV1, AV2 or AV3, thissetting is unavailable.You can also press [STTL ] to switch “STTL” setting.When there are multiple languages, select the subtitle(> 74, DVB Preferred Language).4 Press [OK].The timer programme is stored and the timer icon isdisplayed.“F” lights on the unit’s display to indicate timer recordingstandby has been activated.Repeat steps 2–4 to programme other recordings.Press [Í] to turn the unit off.≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Press [PROG/CHECK].A IconsB Message displayed in the “Drive space” line(Except for [VHS])When the drive is set to VHS, “ – – ” is displayed.C Channel name, programme name and otherinformation are displayed.∫ To change a programmePress [3, 4] to select the programme and press [OK]. (> left)∫ To delete a programmePress [3, 4] to select the programme and press [DELETE ¢].You can also delete a programme with the following steps1 Press [3, 4] to select the programme and press [OPTION].2 Press [3, 4] to select “Delete” and press [OK].∫ To release the unit from recording standbyPress [3, 4] to select the programme and press the “Red”button.≥The timer icon “F” disappears from the timer recording list.≥You cannot cancel timer recording standby mode as long as evenone timer icon “F” remains in the timer recording list.≥Press the “Red” button again to activate timer recording standby.Manually programming timerrecordings[.lllla.Date: Current date up to one month later minusone day;:Daily timer: SUN-SAT>MON-SAT>MON-FRI;:Weekly timer: SUN>--->SATTimerRecording 1:58 SPDVD30:24 SPHDD2:59 SPVHSRemainModeStopStartNo. Date STTLDriveChannel DrivespaceNew Timer ProgrammeTUE 12.10.10. 12:54:00TimerRecording 1:58 SPDVD30:24 SPHDD2:59 SPVHSRemainModeStopStartChannel Date STTLDrive22:3022:0019. 10. TUE OFFHDD1 ARDProgramme NameSPAll Channels : ARDTUE 12.10.10. 12:54:00No. ChannelARD01Timer iconModeStop STTLDriveHDDDrivespaceSP OK22:30 OFFogrammeTUE 12.10.10. 12:56:002:59 SPCheck to make sure “OK” isdisplayed (> right).e.g.,Check, change or delete a programme,or resolve overlappingF Timer recording standby is activated.[ This programme is currently recording.Programmes are overlapped. Recording of the programmewith the later start time starts when the earlier programmefinishes recording.You stopped a daily, weekly or series timer recording. The icondisappears the next time the timer programme startsrecording.The disc was full so the programme failed to record.The programme was copy-protected so it was not recorded.X The programme did not complete recording because the discis dirty or some other reason.Timer programmes set to Auto Renewal Recording (> 34).Titles that have been rerouted to the HDD(Displayed while recording.)Drive Recording drive is set to HDD, DVD or VHS.OK: Displayed if the recording can fit in the remainingspace.> (Date): For recordings made daily or weekly, the display willshow until when recordings can be made (up to amaximum of one month from the present time) basedon the time remaining on the disc.! : It may not be possible to record because:≥(Except for [HDD]) the disc is write-protected.≥there is not enough space left.≥the number of possible titles has reached itsmaximum.≥programmes are overlapped.≥programmes are deactivated.Relief: Timer programmes that will be relief recorded to theHDD.TimerRecording 1:58 SPDVD30:24 SPHDD2:59 SPVHSRemainRETURNOKPress OK to store new programme.Mode STTLStopStartNo. Date DriveChannel DrivespaceNew Timer ProgrammeTUE 12.10.10. 12:54:00