Panasonic Diga DMR-EX99V Operating Instructions Manual

Contents

73VQT2J46Setting menusChanging the unit’s settingsYou can change the unit’s settings using Setup menu.≥The settings remain intact even if you switch the unit to standby.1 While stoppedPress [FUNCTION MENU].2 Press [3, 4] to select “Others” andpress [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select the tab andpress [1].5 Press [3, 4] to select the menu andpress [OK].6 Press [3, 4] to select the option andpress [OK].To return to the previous screenPress [RETURN ].To exit the screenPress [EXIT].(All factory default settings are indicated with underlined text.)∫ Favourites EditYou can create four Favourites of channels for making viewing andrecording easier. Editing these Favourites does not affect thechannel setting itself.≥Timer recording may not work correctly if you edit the Favouriteduring timer recording standby.To add channels to a Favourite1 Press [3, 4] to select the channel in the “All Channels” columnand press the “Yellow” button.≥Repeat this step to add other channels.≥Press the “Blue” button to add all the available channels to theFavourite. (This function is available only when no channelshave been added to the Favourite.)2 Press [OK] to save the Favourite.To change the order of channels of a Favourite1 Press [1]§.2 Press [3, 4] to select the channel in the “Favourite” column tomove and press the “Green” button.3 Press [3, 4] to select the new position of the channel and pressthe “Green” button.≥Repeat the steps 2 – 3 to move other channels.4 Press [OK] to save the Favourite.To delete channels on a Favourite1 Press [1]§.2 Press [3, 4] to select the channel in the “Favourite” column andpress the “Yellow” button.≥Repeat this step to delete other channels.≥Press the “Blue” button to delete all the channels from theFavourite.3 Press [OK] to save the Favourite.Deleting a channel from a Favourite does not affect the channelitself. You can still select the channel from the “All Channels”category.To change the name of a Favourite in the “Favourite”column1 Press [1]§.2 Press the “Red” button.(> 49, Entering text)§ When the station name of the “All Channels” column is highlighted∫ Auto Setup RestartDownload from TVYou can restart auto channel setting if set up (> 12) fails for somereason.Select “Download from TV” when you connect the unit to a Q Linkcompatible TV with a fully wired 21-pin Scart cable or a VIERA Link(HDAVI Control 3 or later) compatible TV with an HDMI cable.When the confirmation screen appearsPress [2, 1] to select “Yes” and press [OK].You can also use the following method to restart Auto Setup.When the unit is on and stoppedPress and hold [X CH] and [CH W] on the main unit until theCountry setting screen appears.All the settings except for the ratings level, ratings PIN, clock settingsand remote control code, etc. return to the factory preset. The timerrecording programmes are also cancelled.∫ Settings for Digital ChannelsPress [OK] to show the following settings.DVB Manual TuningYou can set channels manually that the DVB Auto Setup could notcomplete successfully.1 Press [3, 4] to select the channel you want to set.2 Press [2, 1] to adjust the frequency.≥The frequency rises and falls in steps of 0.5 MHz.≥Adjust the frequency by checking the signal strength and signalquality displays.[Refer to “Signal Condition” (> 74) for signal quality and signalstrength.]3 Press [OK] to start scan.The set channel is displayed in the table.4 Press [EXIT] and press [W X CH] to check that applicablechannels have been selected.Add New DVB ChannelsYou can search for newly added terrestrial digital channels to receive.The unit starts searching fornewly available terrestrial digitalchannels. This takes about5 minutes.A message is displayed whenthe search is finished.“No new DVB channels found.”is displayed when no new channels can be found.Press [OK] to save the newly found channels.Common proceduresTuningPress the “Green” button toselect the Favourite.Tabs Menus OptionsSetup Remote ControlClockDivX RegistrationTV Guide TypeSystem UpdateDVD 1DigitalStandby SettingsDiscPictureSoundDisplayTuningConnectionVHSOthers OK RETURNTABSELECTInitializeFavourites EditorRETURNSELECTFavourite Select Add AllAddAll Channels2 ABC20 ABC HDTVFavourite 1New Channel Message (> 19)When a new DVB channel is added this unit will be informedautomatically. Then the confirmation message appears. If youselect “Yes” on the display, Auto-Setup starts (all channel settingsare deleted. The timer recording programmes are also cancelled.).[Automatic][Off] The Channel Messages are not shown.DVB Manual TuningFrequency MHzNewChannel Name TypeRETURN0 100 10[CH24] 498,0Signal QualitySignal StrengthChannel System Western Europe (CCIR)Change Channel SystemOFFSETSTART SCANCHTV : 0 Radio : 0 Data : 0No.If there is no signal qualityand/or signal strength, pressthe “Red” button and selectthe correct channel system.Add New DVB ChannelsScan CH 5 69CH QualityChannel Name Type