25Advanced EditingRQT8850Setup Protection / Cancel ProtectionPerform steps 1−3 of “Accessing the Recording View”(➔ 24).RAMUse to prevent accidental erasure of recordings.e, r to select “Setup Protection”or “Cancel Protection”, thenw to select “Yes”, thenThe lock symbolappears when therecording is protected.DVD-RAMDIRECT NAVIGATOR Recor10 10/27 Mon07 088 10/27 MoChange ThumbnailPerform steps 1−3 of “Accessing the Recording View”(➔ 24).RAM -R -R DL -RW(V) +R +R DL +RWChanges the thumbnail picture shown in the RecordingView screen.e, r to select“Change Thumbnail”, thenDVD-RAMDIRECT NAVIGATOR Change ThumbnailChangeExit0:01.05--:--.--Change Start play and selectthe thumbnail position.08ENTERto start play.at the point you want touse as the thumbnail.To change the thumbnail:Restart play and press [e, r] to select“Change” then press [ENTER] at the pointyou want to use as the thumbnail.–e, r to select “Exit”, thenTipsFor quicker editingUse search (➔ 16), Slow-motion (➔ 17) or Time Slip (➔ 17) to findthe desired point.To skip to the start or end of a recording, press [u] (start) or [i](end).For better precision, use Slow-motion (➔ 17) and Frame-by-Frame (➔ 17).•••Divide RecordingPerform steps 1−3 of “Accessing the Recording View”(➔ 24).RAMOnce divided, recordings cannot be recombined.e, r to select “Divide Recording”thenDVD-RAMDIRECT NAVIGATOR Divide Recording0:00.11--:--.--Divide08DivideExitPlayPreviewENTERDVD-RAMDIRECT NAVIGATOR Divide Recording0:00.11--:--.--Divide08DivideExitPlayPreviewENTERat the point you want todivide.For quicker editing (➔ Left, Tips)Selecting “Preview” then pressing [ENTER]plays the recording from 10 seconds prior, to10 seconds after the division point.To change the point to divide at:Restart play and press [e,r] to select“Divide” then press [ENTER] to bring to thepoint where you want to divide.–––e, r to select “Exit” thenw to select “Divide” thenThe recording is divided at that point.–NotesDivided recordings retain the name of the original.A short amount of video and audio just before and after the divisionpoint gets cut out.You cannot divide a recording when the resulting parts are too shortor when the total number of recordings exceeds 99.•••