31Setting MenusRQT8850Video MenuRAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR)PictureSet picture mode.Normal: Default settingCinema: Mellows movies, enhances detail in dark scenes.DNR (Digital Noise Reduction)“On” reduces noise and picture degradation.Progressive [Only when you have selected “480p” in“TV Type” (➔ 46)]Select “On” to enable progressive output.Select “Off” if the picture is stretched horizontally.When progressive output on, you cannot use the TV’s closedcaptions, but you can use this unit’s closed captions. Go to thisunit’s Setup menu to turn on closed captions. (➔ 35).Transfer [Only when you have selected “On” in“Progressive” (➔ above)]Select the method of conversion for progressive output to suit thetype of material being played.Auto1 (normal): Film and video contents are detectedautomatically and converted properly.Auto2: When using “Auto1” and video content isdistorted as shown below.Line-in NR (Only when IN1 or IN2 is selected)Reduces video tape noise during recording. Depending on the videosignal, jittering may occur.On: Noise reduction works for any video input.Off: Noise reduction is off. Select when you want to recordinput as is.Audio MenuRAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR)V. Surround Sound (Dolby Digital with 2.0 or overchannels only)This function does not work for SAP recordings.Enjoy a surround-sound effect if you are using 2 front speakers(L/R) only.Turn off if it causes distortion.Natural / Emphasis / OffDialog Enhancer (Dolby Digital, 3-channel or overonly, including a center channel)When “On”, the volume of the center channel is raised to makedialogue easier to hear.Other MenuSignal meterAllows you to check the strength of the digital broadcast signal.Only the strength of the digital broadcast received through theantenna is displayed accurately.PositionChange where this menu screen appears on your TV.•••••