Panasonic Diga DMR-EZ25EB Operating Instructions Manual

Contents

11If you receive your television programme via a satellite receiver (digital/analogue),connect your DVD Recorder as shown in connection type B.View / record satellite programmesPress INPUT SELECT to select the input channel AV2 or put this unit instandby mode.To record satellite programmes refer to “Timer Recording from Satwith VIDEO Plus+". 22If your television supports Q Link, use a fully wired 21-pin Scart cable to connectit to the TV.The analogue stations automatically downloaded through [Download from TV].If your television supports RGB, set the AV1 Output to RGB 1 or RGB 2 in theSetup menu. 44[Auto-Setup] follows automatically and if it ends with the note: [No stations found !].! Select [No] with and confirm with ENTER.! You can complete the Owner ID now. To skip this step and do it later,press the RETURN button.The date and time are not set automatically. Set them manually.47An incorrect date or time affects the programmed recording of televisionprogrammes (note summer and winter time).46Yes NoAuto-SetupNo stations found !Please check aerial connectionRestart Auto-SetupSELECTRETURNENTERThe TV Guide does not show any information if you have connectedthe unit to a satellite receiver only.Connecting to a television and Satellite receiver BAfter completing the above connections, proceed to the Auto-Setup. 9Your DVD Recorder is now ready to use.! Switch the DVD Recorder to AV2 with CH .You see the television picture from the external unit.123456Connect the aerial to the RF IN (aerial input) of the external unit.household mains socket.Connect the RF OUT (aerial output) of the external unit with the RF IN(aerial input) of the DVD Recorder.Connect the RF OUT (aerial output) of the DVD Recorder with the RFIN (aerial input) of the television unit.Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorderwith the Scart input of the television unit.Connect the external unit with a 21-pin Scart cable to the AV2 terminalof the DVD Recorder.Connect the DVD Recorder, the TV and the external unit to theAuto-Setup with connected Satellite Receiver and aerialAuto-Setup with connected Satellite ReceiverSwitch on the external unit and DVD Recorder.Turn on the television and select the AV input that this unit is connected to.Auto-Setup