Panasonic Diga DMR-EZ25EB Operating Instructions Manual

Contents

56You can use this frequently usedstandard connection with theprovided accessories (Videocable).Depending on the television, theconnection with the S VIDEOcable results in a higher qualitypicture than the connection withan Audio/Video cable. The QLink functions are not availablewith this kind of connection.91234Connect the aerial to RF IN (Aerial input) of the DVD Recorder.Connect RF OUT (Aerial output) of the DVD Recorder with theaerial input of the TV.Connect the AUDIO OUT (L-white/R-red) of the DVD Recorder with the audio ofthe television.Connect the VIDEO OUT or S VIDEO OUT of the DVD Recorder with the inputof the television.Connect the DVD Recorder and the television to the household mains socket.Connection with Video cable or S Video cableThis unit’s rear panelRF IN Audio/Video INTelevision’s rear panel4To householdmains socketRF coaxial cable(included, black) 2Audio/Video cable(included)Video YellowL WhiteR Red3S Video IN3Video cable or S Video cableS Video-cableTo the aerial To this unitUse one of the included RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable.RF coaxial cable (included, grey)RF coaxial cable (included, black)or11After completing the above connections, proceed to the Auto-Setup to tune inTV channels.If the unit is connected via S Video output, select the setting S Video ( withcomponent )] in the setup menu under [Connection] - [AV1 Output] .4AC mains lead (included)Connect only after all otherconnections are complete.To household mains socket(AC 220 V to 240 V, 50 Hz)The RF cable cannot be used forshowing pictures from the DVDRecorder. The unit must beconnected by another means e.g.Scart cable to show pictures from theDVD Recorder on the television set.44