Panasonic Diga DMR-EZ25EB Operating Instructions Manual

Contents

52This unit’s rear panel4AC mains lead (included)Connect only after all otherconnections are complete.To household mains socket(AC 220 V to 240 V, 50 Hz)RF INTelevision’s rear panel4To householdmains socketRF coaxial cable(included, black) 2The HDMI connection can be used only with units that are suited for HDMI.93 HDMI-cable1234Connect the aerial to RF IN (Aerial input) of the DVD Recorder.Connect RF OUT (Aerial output) of the DVD Recorder with theaerial input of the TV.Connect HDMI AV OUT of the DVD Recorder with the HDMI input of the TV.For Q Link functions:Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with theScart input of the TV.Connect the DVD Recorder and the television to the household mains socket.HDMI INOnly use fully wired cables showing the HDMI logo.Use cable of max. 5 m in length to avoid interference withthe video signal.HDMIConnection with HDMI cable (not included)To the aerial To this unitUse one of the included RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable.RF coaxial cable (included, grey)RF coaxial cable (included, black)or11AV INFully wired 21-pinScart cable(enables Q Link functions)3The RF cable cannot be usedfor showing pictures from theDVD Recorder. The unit mustbe connected by anothermeans e.g. Scart cable to showpictures from the DVDRecorder on the television set.After completing the above connections, proceed to the Auto-Setup to tunein TV channels.