Panasonic Diga DMR-EZ25EB Operating Instructions Manual

Contents

43Setup Dynamic Range CompressionAudiomode for XP RecordingBilingual Audio SelectionDigital Audio OutputDolby DigitalOffM1SetupPCM-Down ConversionMPEGDolby DigitalPCMOffBitstreamDigital Audio OutputDTS BitstreamBitstreamDolby DigitalPCMDisplay Setting ENTERENTER OptionDVB Preferred Subtitle [English] [Welsh] [Gaelic]On-Screen MessagesGrey BackgroundFL Display[Off] [3 sec.] [5 sec.] [7 sec.] [10 sec.][On] [Off][Bright] [Dim]DVB Preferred SubtitleOn-Screen MessagesGrey BackgroundEnglish5 sec.OnFL Display BrightNew Services Messages AutomaticSetupTuningDiscPictureConnectionOthersTuningDisplayConnectionOthersDiscSoundPictureAudiomode for DV Input Stereo 1TuningDisplayConnectionOthersDiscSoundPictureSoundDisplayNew Service Messages [Automatic] [Off]SELECTTABRETURNSELECTENTER RETURNTABBilingual Audio SelectionPCM Down ConversionDolby Digital, DTS, MPEGAudio Mode for DV InputDynamic Range CompressionDigital Audio Output [PCM Down Conversion][Dolby Digital] [DTS] [MPEG][M 1] [M 2][On] [Off][Bitstream] [PCM][Stereo 1] [Stereo 2] [Mix]-R +R-RW(V)+R DL-R DL+RWDVD-V-R +R-RW(V) +R DL-R DL +RWSound Setting ENTERENTER OptionOn: The level of quieter passages increases and the level of louder passagesdecreases. The audio can be clearly understood even when the volume is lowered.If you want to record programmes that are broadcast in dual-channel sound, you canselect between the original language [M1] or another available language [M2]. If youare copying from an external source or from a tape position, select the sound track onthe other unit.Select the appropriate setting if you have connected an external unit to theDIGITAL AUDIO OUT of the DVD Recorder.Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite thissetting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over96 kHz or 88.2 kHz or if the disc is copy-protected.On: The connected unit cannot process signals with a scan frequency of 96 kHz or88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2kHz. Signals are output as 96 kHz or 88.2 kHz.Bitstream: The connected unit can decode the corresponding signal.PCM: If the connected unit cannot decode the corresponding signal, the setting must bechanged to [PCM]. Otherwise, the loud noise can lead to damage to your hearing orloudspeaker. Make the necessary changes depending on your audio system.Select the audio type when copying from the DV input.Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over[On] [Off] (Dolby Digital Only)Audio Mode for XP Recording [Dolby Digital] [LPCM]Choosing the audio type when recording in XP mode. The picture quality of LPCMrecordings may possibly be poorer than normal recordings in XP modeChanges the brightness of the display on the unit.Select the time for screen displays.Off: The screens are not shown on changing the station.On: the grey background is displayed when there is no analogue TV reception.Subtitle language for digital programmes (standard or for the hard-of-hearing).Off: The Service Messages are not shown.SetupFUNCTIONS / To Others