28RQT8853Advanced Video Cassette PlaybackStereo Mono L Mono R No display (Normal audio track) Changing Audio during PlaybackAUDIOA repeatedly, to select the audiooption.TipsAuto Bilingual Selection Function [VHS]When a stereo broadcast or multilingual broadcast is recordedand played back on the unit, stereo sound will be automaticallyselected in the case of a stereo broadcast and SAP sound will beautomatically selected in the case of a multilingual broadcast.– This function may not work properly if the program is played backfrom a mid point. In a case like this, press [AUDIO] and select theright sound.– The function will not work with a cassette which has been recordedfrom the external equipment.NotesRemaining tape time displayThe displayed time is approximate.The displayed time will be incorrect if you set the wrong tapelength in “Select Tape Length” in the Setup menu (¼ 51) and if thetape is of poor quality.On-screen Display IndicatorsSTATUSto display on-screen indicators.VHSMono L 0:00.22SP VHS drive indicator Shows which sound mode is selected as follows:Stereo: Hi-Fi stereo audioMono L: Mono L audio of the Hi-Fi stereoaudioMono R: Mono R audio of the Hi-Fi stereoaudioNo indicator: Normal audio Operation status Shows the tape counter and remaining tape timePressing [STATUS] to cycle the display as follows:No display Tape counter Remaining tape time Press [ CANCEL] to reset the tape counter(elapsed time) to “0:00.00”. The tape counteris automatically reset when inserting a videocassette. Video cassette-in indicator Recording mode (¼ 14)TipsTo exit on-screen indicatorsPress [STATUS] several times.The following on-screen indicator will not be displayedwhen this unit is connected to the TV with the DVDPRIORITY output terminals or HDMI AV OUT terminal.This indicator is only displayed when playing a tape inthis unit’s VHS drive. The items displayed may differdepending on the operating conditions.