Panasonic Diga DMR-EZ47 Operating Instructions Manual

Also see for Diga DMR-EZ47: Firmware instructions Installation instructions

Contents

66RQT8853,  to select “Set ClockAutomatically”, then ENTERENTER to start auto setting.The following screen appears when the settingis complete.Set Clock AutomaticallyClock Setting completed successfully.4/4/2007 11:15 AMDST----------- OnTime Zone---- ESTENTERClock Settings NotesThis may take some time, up to a few hours in some cases.If the following message appearsSetupSetupAudioDisplayTV ScreenVHSChannelDiscVideo NoYesENTERSet Clock Automatically12/14/2007 5:28 AMDST----------- OffTime Zone---- ESTSetting completed as follows.Finish the setup with this clock time?Note:Selecting“No”will start channel scanningagain and renew the clock time.If the time is correct, press [] to select “Yes”, then press [ENTER].– If you select “No”, auto setting starts again, then the abovescreen reappears. Repeat this step until the correct time appears.If the clock is not correct, set the clock with “Adjust Time Zone”(¼ 67) or “Set Clock Manually” (¼ 48).TipsTo cancel in the middlePress [RETURN].Time ZoneTime Zone shows the time difference from Greenwich Mean Time(GMT).EST (Eastern Standard Time)  GMT 5CST (Central Standard Time)  GMT 6MST (Mountain Standard Time)  GMT 7PST (Pacifi c Standard Time)  GMT 8AST (Alaska Standard Time)  GMT 9HST (Hawaii Standard Time)  GMT 10For other areas: xx hrDST (Daylight Saving Time)If you select “On”, the clock is advanced one hour starting at2 a.m. on the second Sunday in March and ending at 2 a.m. on thefi rst Sunday in November.Set the DST period manually when it varies according to regions(¼ 63).To return to the previous screenPress [RETURN].To exit the screenPress [RETURN] several times.ENTER to complete.Other SettingsSet Clock Automatically,  to select “Other Functions”,then ENTER,  to select “Setup”,then ENTER,  to select “Setup”,then .,  to select “Clock Settings”,then ENTERWith the unit stopped