Panasonic Diga DMR-HWT230 Operating Instructions Manual

Contents

Panasonic Diga DMR-HWT230 Operating Instructions Manual Manual pdf 17 page image

Getting startedVQT4W79 171 Turn on the TV, then select the appropriateAV input to suit the connections to this unit.2 Press [Í] on the remote control or [Í/I] onthis unit.• The Easy Setting will start at the initialpower on.Auto Setup starts.(This operation may take some time.)e.g.,After tuning has been completed, clock willbe set automatically.• If the region selection screen appears,select repeatedly until you reach theavailable region.• If the clock setting screen appears, set thetime manually (> 77, Clock).3 Enter the PIN.This PIN will be used only for the OwnerID-Data Entry screen.1 Press the number buttons to enter 4-digitPIN.2 Repeat step 1 to confirm.• Make a note of PIN in case you forget it.The PIN number cannot be reset.• Steps 3 – 5 will be skipped in the EasySetting after “Shipping Condition”(> 77) is performed. (> go to step 6 onpage 18)4 Set the Owner ID-Data Entry (“NAME”,“HOUSE NO” and “POSTCODE”).e.g.,1 Select the item, then press [OK].2 Select the character, then press [OK].Repeat this step.3 Press [BACK/RETURN ].4 Repeat steps 1-3 to enter all data.5 Press [BACK/RETURN ] to exit fromthe Owner ID-Data Entry screen.5 Enter the new PIN for parental control.• The default PIN is “0000”.1 Enter the new 4-digit PIN with the numberbuttons.• Make a note of the PIN you havedecided on in case you forget it.2 Press [OK].Easy SettingProgressDVB Auto SetupCH 21 68CHFree TV: 2 Pay TV: 0 Data: 0Radio: 0SearchingActual number of channels may differ due to channel duplication.QualityTypeChannel NameRETURNThis will take about 3 minutes.35 101035Free TVFree TVOwner IDPlease enter new PINPIN0 PIN entry9You now have the opportunity to enter yourdetails and help the police to crack crime.See Instruction Book.* * * *RETURNOwner ID-Data EntryNAMEHOUSE NOPOSTCODEPIN 0000RETURNChange PINSelect0Number 9-PIN EntryEnter a new 4-digit PIN, then press OK.This PIN will be used for controlling viewing and playback.PIN will be set to “0000” by pressing “RETURN” when there is nonumber input.- - -RETURN