RecordingVQT4W7926Recording TV programmesRecording• One recording will terminate when simultaneous recordingis being done and timer recording starts.• Digital teletext will not be recorded.• Following contents or media cannot be played back whilerecording.- Xvid and MKV file- photo- USB HDD (For data files) and USB memory• Copying cannot be performed while recording.• When “Automatic Standby after OTR” is set to “On” (> 76),this unit is turned to standby mode if this unit is notoperated for approximately 5 minutes after completing“Automatic Stop” or “Recording Time”.The titles can only be recorded to built-inHDD and cannot be copied from built-in HDDto the media other than USB HDD.• This unit can record two programmes beingbroadcasted at the same time.1 Select the channel to record.2 Press [REC ¥].Recording starts.• “REC1” or “REC2” will light on the unit’sdisplay.3 Select “Automatic Stop”, then press[OK].• One touch recording (OTR)Recording stops automatically when theprogramme ends.• You can also select “Recording Time” or“Continuous recording”. (> right)Automatic Stop (Guide Link) at 8:45REC1/OTRRecording TimeContinuous recording30 min8:00 - 8:45To set the recording time1 Select “Recording Time” or “Continuousrecording” in step 3 (> left).Recording Time:You can set the length of recording time from30 minutes to 4 hours.• You can select the recording time with[2, 1].Continuous recording:The recording is continued until you press[STOP ∫].2 Press [OK].
