TroubleshootingVQT4W7988Troubleshooting guideIf there is any problem, the following message isdisplayed on the screen.When you experience problems withEasy Network SettingWireless SettingsDisplay Check the followingA conflict withother devicesoccurred.• Please wait a few moments,and then try again.A time out erroroccurred.• Setting of the Wireless routerfor MAC Address etc.• The signal may be weak.[HWT130] Using the USBextension cable supplied withthe Wireless LAN Adaptor,adjust the position of theWireless LAN Adaptor.• The SSID and the encryptionkey of the Wireless router.• Please wait a few moments,and then try again.Anauthenticationerror or a timeout erroroccurred.A device erroroccurred.• [HWT130] Connection ofWireless LAN Adaptor• If the problem is not solved,consult your dealer.Easy Network Setting ( Home NetworkConnection Check )Display Check thefollowing1. LAN cableconnection orWireless setting:“Fail”• Connectionof the LANcables(> 15)• Settings ofthe hub androuter2. IP addresssetting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”• Connectionand settingsof the huband router• Settings of“IP Address /DNSSettings”(> 66, 74)2. IP addresssetting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”2. IP addresssetting: “Pass”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”2. IP addresssetting:“Homenetworkavailable”3. Connection togateway: “Fail”
