Panasonic Diga DMR-PWT500 Operating Instructions Manual

Also see for Diga DMR-PWT500: Operating instructions

Contents

Panasonic Diga DMR-PWT500 Operating Instructions Manual Manual pdf 16 page image

Getting startedVQT3C8116Settings∫ Wireless Settings≥If there is no problem, the following screen isdisplayed.≥If there is any problem, the following message isdisplayed on the screen.∫ Network Easy Setting ( Home NetworkConnection Check )≥If there is no problem, the following screen isdisplayed.e.g., “Wireless” connection≥If there is any problem, the following message isdisplayed on the screen.When you experience problems withsettingsDisplay Check the followingA conflict with otherdevices occurred.≥Please wait a fewmoments, and then tryagain.A time out erroroccurred.≥Setting of the Wirelessrouter for MAC Addressetc.≥The signal may be weak.≥The SSID and theencryption key of theWireless router.≥Please wait a fewmoments, and then tryagain.An authenticationerror or a time outerror occurred.A device erroroccurred.≥If there is no improvementin symptom, contact yourdealer.OKWireless SettingsComplete.Network name( SSID ):Wireless type :Authentication type :Encryption type :ReceptionPress OK to check network connection.For better performance of Home Network (DLNA), it isrecommended using a wireless access pointcompatible with 802.11n (5GHz).:Display Check thefollowing1. LAN cableconnection orWireless setting:“Fail”≥Connection ofthe LANcables (> 12)≥Settings ofthe hub androuter2. IP addresssetting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”≥Connectionand settingsof the huband router≥Settings of“IP Address /DNSSettings”(> 83)2. IP addresssetting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”2. IP addresssetting: “Pass”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”2. IP addresssetting:“Homenetworkavailable”3. Connection togateway: “Fail”OKNetwork Easy Setting ( Home Network Connection Check )Completed.Network connection check has finished.Press OK.1. Wireless setting : Pass2. IP address setting : Pass3. Connection to gateway : Pass