Convenient functionsVQT3C8166VIERA Link functionsPreparation1 Set “VIERA Link” to “On” (> 81). (The defaultsetting is “On”.)2 Set the “HDAVI Control” operations on theconnected equipment (e.g., TV).≥Set the input channel on the VIERA to suit theterminal to be used as “HDAVI Control”.3 Turn on all “HDAVI Control” compatible equipment,then select this unit’s input channel on theconnected TV so that the “HDAVI Control” functionworks properly.≥Also when the connection or settings arechanged, repeat this procedure.When the following operations are performed, the TVwill automatically switch the input channel and displaythe corresponding action. Additionally when the TV isoff, the TV will automatically turn on.–When play starts on the unit–When an action that uses DIRECT NAVIGATOR orFUNCTION MENU etc, is performedWhen you set the TV to standby mode, the unit is alsoautomatically set to standby mode.≥Power off link function does not work whenrecording, copying, etc.The following operations make it possible to keep thepower of the unit on and to play music continuously.When the unit is directly connected to an amplifier/receiver.1 While playing musicPress [OPTION].2 Select “TV Power Off”, then press [OK].≥Sound may be discontinued for several secondswhen the power to the TV is turned off.You can operate this unit with the TV remote control.Refer to “PAUSE LIVE TV” on page 28.This function allows you to immediately startrecording the programme that you are viewing on theTV.Refer to the TV operating instructions foroperation.What is VIERA Link “HDAVI Control”?VIERA Link “HDAVI Control” is a convenientfunction that offers linked operations of thisunit, and a Panasonic TV (VIERA) or receiverunder “HDAVI Control”. You can use thisfunction by connecting the equipment with theHDMI cable. See the operating instructions forconnected equipment for operational details.Automatic input switchingPower on linkPower off linkPlaying music continuously evenafter turning off power to the TV§2PAUSE LIVE TV§1Direct TV Recording§1