Panasonic Diga DMR-PWT500 Operating Instructions Manual

Also see for Diga DMR-PWT500: Operating instructions

Contents

Panasonic Diga DMR-PWT500 Operating Instructions Manual Manual pdf 22 page image

Getting startedVQT3C8422Settings∫ Wireless Settings≥If there is no problem, the following screen is displayed.≥If there is any problem, the following message isdisplayed on the screen.∫ Network Easy Setting ( Home NetworkConnection Check )≥If there is no problem, the following screen is displayed.e.g., “Wireless” connection≥If there is any problem, the following message isdisplayed on the screen.When you experience problems withsettingsDisplay Check the followingA conflict withanother deviceoccurred.≥Please wait a few moments,and then try again.A time out erroroccurred.≥Setting of the Wireless routerfor MAC Address etc.≥The signal may be weak.≥The SSID and the encryptionkey of the Wireless router.≥Please wait a few moments,and then try again.An authenticationerror or a time outerror occurred.A device erroroccurred.≥If there is no improvement insymptom, contact your dealer.OKWireless SettingsComplete.Network name(SSID):Wireless type :Authentication type :Encryption type :ReceptionPress OK to check network connection.For better performance of Home Network (DLNA), it isrecommended using a wireless access pointcompatible with 802.11n (5GHz).:Display Check thefollowing1. LAN cableconnection orWireless setting:“Fail”≥Connection ofthe LAN cables(> 14)2. IP address setting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”≥Connection andsettings of thehub and router≥Settings of “IPAddress / DNSSettings”(> 82)2. IP address setting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”2. IP address setting: “Pass”3. Connection togateway: “Fail”1. LAN cableconnection orWireless setting:“Pass”2. IP address setting: “Homenetworkavailable”3. Connection togateway: “Fail”OKNetwork Easy Setting (Home Network Connection Check)Completed.Network connection check has finished.Press OK.1. Wireless setting : Pass2. IP address setting : Pass3. Connection to gateway : Pass