RecordingVQT3C8429To set the recording time1 Select “Recording Time” or “Continuous recording” instep on page 28.2 Press [OK].∫ Recording mode conversionConversion is performed when the unit is turned off.¾ To confirm whether the conversion is completed(> 47, To confirm whether the conversion iscompleted)¾ To cancel a conversion (> 47, To cancel a “Duringstandby” conversion)¾ To convert the recording mode after recording in DRmode (> 47)¾ Recording modes and approximate recording times(> 103)≥ One recording will terminate when simultaneous recording is being doneand timer recording starts.≥ When “Automatic Standby after OTR” is set to “On” (> 84), this unit isturned to standby mode if this unit is not operated for approximately5 minutes after completing “Automatic Stop” or “Recording Time” (> 28).Press [STATUS ].Press [CH W X].It is necessary to display the recording programme onto theTV screen to perform operations such as pause.Press [CH W X] to select the recordingchannel.RecordingTimeYou can set the length of recordingtime from 30 minutes to 4 hours.Select the recording time.≥You can also set the time with[REC ¥].ContinuousrecordingThe recording is continued until youpress [STOP ∫].≥ The title before conversion (the title recorded in DR mode) will bedeleted once the conversion is completed.≥ When the HDD does not have enough remaining time, conversionwill not start.≥ This function is stopped when this unit is turned on. Conversion willstart from the beginning again once the unit is turned off.≥ When converted, audio track, multi channel audio and subtitle willbe converted with the same settings as at the start of recording.Operation during RecordingTo check the recording programmeTo switch the ChannelTo display the recording programmeon the TVe.g., While recording 2 programmes simultaneouslyREC2HDDREC1/OTR AUTO Recording programme displayed onthe TVRecording programme not displayedon the TV