Convenient functionsVQT3C8482Changing the unit’s settings∫ Network Easy SettingPress [OK] to start Network Easy Setting. (> 21)∫ Network Settings¾ LAN Connection ModeSelect connection method.¾ Wireless SettingsThis allows the Wireless router and connection settingsto be set and the current connection settings andconnection state to be checked when a wirelessconnection is used.¾ Connection SettingThe Wireless router connection wizard will bedisplayed.¾ Double Speed Mode Setting (2.4GHz)When a 2.4 GHz wireless format is used, this settingsets the connection speed.≥If you connect using the “Double SpeedMode(40MHz)”, 2 channels use the samefrequency band, and there is consequently agreater risk of reception interference. This cancause the connection speed to drop or theconnection to become unstable.¾ IP Address / DNS SettingsCheck the connection of the network or set the IPaddress and DNS.≥Press [OK] to show the respective setting.¾ Proxy Server SettingsCheck and set the connection to the Proxy server.≥Press [OK] to show the respective setting.¾ Internet Content Settings¾ LockYou can restrict using VIERA CAST.≥Follow the on-screen instructions.≥PIN is required to change. (> 74)¾ Automatic Volume ControlVolume that is different depending on the contents isadjusted automatically to the standard volume whileusing the VIERA CAST.≥Depending on contents, this function will not work.≥Select “Off” when the audio is warped.NetworkSetupNetworkNetworkNetwork Easy SettingNetwork SettingsNetworkNetwork SettingsNetwork SettingsWireless SettingsIP Address / DNS SettingsProxy Server SettingsInternet Content SettingsHome Network ( DLNA ) Server SettingsLAN Connection ModeNetwork SettingsWireless SettingsWireless SettingsDouble Speed Mode Setting (2.4GHz)Connection Setting≥ “Connection Speed Setting” is enabled only when “ConnectionSpeed Auto-configure” is turned “Off”.Network SettingsInternet Content SettingsInternet Content SettingsAutomatic Volume ControlLock