Panasonic Diga DMR-PWT500 Operating Instructions Manual

Also see for Diga DMR-PWT500: Operating instructions

Contents

Panasonic Diga DMR-PWT500 Operating Instructions Manual Manual pdf 83 page image

Convenient functionsVQT3C8483¾ Home Network ( DLNA ) Server SettingsYou can set the DLNA (Server) function (> 70)¾ Home Network ( DLNA ) ServerfunctionYou can switch between enable/disable of the DLNA(Server) function.≥If “On” is selected, “Power Save in Standby” isfixed to “Off”. (> right)¾ Setting device nameIt is also possible to change the name of this unit onthe network.≥Select from a preset listSelect the preset name, then press [OK].≥Create nameEnter the name. (> 66, Entering text)¾ Registration type for remote devices¾ Remote device list≥This function cannot be enabled when “Manual” isselected in “Registration type for remote devices”.(> above)≥To register equipment manually1 Select the device name or the MAC Address forthe device you want to register, then press[OK].2 Select “Yes”, then press [OK].≥To deregister equipment1 Select the registered equipment, then press[OK].2 Select “Yes”, then press [OK].∫ Standby Settings¾ Power Save in Standby≥This function cannot be enabled when the DLNAfunction is enabled in “Home Network ( DLNA )Server Settings”. (> left)≥The setting may be changed to “Off” automaticallywhen the setting for video communication is changed.(> 67)¾ Automatic StandbySet the time to turn the unit to standby modeautomatically.After the unit has finished operating, the unit will beturned to standby mode once the set time has passed.≥When “REWIND LIVE TV” is set to “On”(> 77), “Off”cannot be selected.Automatic All connected devices on the samenetwork can access this unit.Manual Only registered devices canaccess this unit.≥ The maximum number of equipment that can be registered is16.Network SettingsHome Network ( DLNA ) Server SettingsHome Network ( DLNA ) Server SettingsHome Network ( DLNA ) Server functionSetting device nameRegistration type for remote devicesRemote device listOthersOn It will go into the “Power Save inStandby” mode.On Timer “Power Save in Standby” is activatedwhen the set time comes.≥If the clock has not been set, “PowerSave in Standby” is activated at allhours.Off It is possible to start quickly from thestandby mode. (Quick Start mode)SetupOthersOthersStandby Settings EnlgishRemote ControlClockPIN EntrySystem UpdateSystem InformationDivX RegistrationInitializeOthersStandby Settings EnlgishStandby SettingsPower Save in Standby EnlgishAutomatic StandbyAutomatic Standby after OTRAutomatic Standby after CopyRF OUT ( Aerial Signal )