Panasonic Diga DMR-XW300 Operating Instructions Manual

Contents

107RQT9135VIERA Link PageVIERA Link doesn’t work. ≥Check the HDMI cable connection. Check that “HDMI” is displayed on the front display whenthe power for the main unit is set to On.≥Make sure that “VIERA Link” is set to “On”.≥Check the “HDAVI Control” settings on the connected device.≥Some functions may not work if depending on the version of “HDAVI Control” of the connectedequipment. This unit supports “HDAVI Control 3” functions.≥If the connection for the equipment connected with HDMI was changed, or if there was apower failure or the plug was removed from the household mains socket, “HDAVI Control” maynot work.In this case, perform the following operations.1 When the HDMI cable is connected to all equipment with the power on, turn the TV (VIERA)on again.2 Change the TV (VIERA) settings for the “HDAVI Control” function to off, and then set to onagain. (For more information, see the VIERA operating instructions.)3 Switch the VIERA input to HDMI connection with this unit, and after this unit’s screen isdisplayed check that “HDAVI Control” is working.—85———The operation on this unit (musicplayback etc.) is interrupted.≥The operation on this unit may be interrupted when you press buttons on the TV remotecontrol that do not work for VIERA Link functions.—To reset this unitTo return all the settings otherthan the main ones to the factorypreset≥Select “Yes” in “Shipping Condition” in the Setup menu. All the settings except for the ratingslevel and ratings password return to the factory preset. The timer recording programmes arealso cancelled.≥Select “Yes” in “Default Settings” in the Setup menu. All the settings other than the tuningsettings, clock settings, disc language settings, ratings level, ratings password, remotecontrol code, network settings return to the factory presets.≥Press and hold [X CH] and [CH W] on the main unit until the Region Selection screenappears. All the settings except for the ratings level, ratings password and clock settingsreturn to the factory preset. The timer recording programmes are also cancelled.8686—To reset the ratings levelsettings≥While the disc tray is open, press [DRIVE SELECT] to select the DVD drive, then press andhold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more seconds.—To restore the unit if it freezesdue to one of the safety devicesbeing activated≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.) —NetworkI can’t connect to the network. ≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on thisunit? Connect with a straight LAN cable.≥Is the power for the modem or broadband router turned on? Turn the power on for eachdevice.≥Is there a mistake in the network settings? Follow any instructions you may have receivedfrom your ISP (Internet Service Provider) and make changes to the settings.≥Are the broadband router settings correct? Read the operating instructions for the broadbandrouter.≥Is the broadband router and/or modem correctly connected? Check the operatinginstructions for each device and connect accordingly.9494————While using my PC, I cannotconnect to the network.≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminalsconnecting at the same time? Check the content of your contract.—OtherAfter performing an update, youcan no longer receivebroadcasts.≥Depending on the content of the update, some settings may have returned to the presetvalues. Fix the settings again.—Troubleshooting guide