19RQT91354 Press [3, 4] to select “On” or “Off”and press [OK].≥On:It is possible to start quickly from the power off state.≥Off:It will go into the Power Save mode when the power isturned off.After Quick Start setting is complete, TV aspect setting screenappears.5 Press [3, 4] to select the TV aspectand press [OK].≥16:9:When connected to a 16:9 widescreen television≥Pan & Scan:When connected to a 4:3 aspect television,side picture is trimmed for 16:9 picture(➡ 110).≥Letterbox:When connected to a 4:3 aspect television.16:9 picture is shown in the letterbox style(➡ 110).When television picture appears, set up is complete.To stop partwayPress [RETURN].∫ Download from the TVIf this unit is connected to a Panasonic TV (VIERA) supportingHDAVI Control 3 via an HDMI cable, then the setting informationon the TV is acquired by this unit when the unit is turned on forthe first time. Please proceed to the following steps.After Download from TV is complete, Quick Start settingscreen appears.Press [3, 4] to select “On” or “Off” and press [OK].When television picture appears, set up is complete.To stop partwayPress [RETURN].[Note]≥Acquisition of the setting information is not supported by allPanasonic TVs (VIERA).≥The acquisition may take some time depending on the VIERAsetting information.≥If Region Selection screen is displayed, please go to step 3 onpage 18.∫ To confirm that stations have been tunedcorrectly (➡ 81)∫ To restart set up (➡ 80)OKRETURNQuick StartOnOffWhen “On” is selected, power consumptionduring standby will increase, and “Power Save”option will be set to “Off”.16:9Pan & ScanLetterbox4:3 TVTV Aspect16:9 WIDE TVOKRETURNRETURNDownload from TVDownload in progress. Please wait.RETURN : to cancelOKRETURNQuick StartOnOffWhen “On” is selected, power consumptionduring standby will increase, and “Power Save”option will be set to “Off”.STEP 2 Channel reception settings and TV aspect settings
