Panasonic Digital Palmcorder PV-GS13 Operating Instructions Manual

Contents

Panasonic Digital Palmcorder PV-GS13 Operating Instructions Manual Manual pdf 38 page image

38Playback ModePlaying Back a Memory Card (ForPV-GS13/ PV-GS15)It plays back fi les recorded on a Card.1 Set the Mode Dial 40 to Picture PlaybackMode.► : Starting the Slide Show: Playing back the next picture: Playing back the previous picture: Stop the Slide Show: Pause the Slide Show2 Start Playback.40To Change the Zoom Magnification2 Change the magnification by pressing the [W]Button or [T] Button 62 on the RemoteControl.To Change the Enlarging Area of an Image3 Press the Arrow Button (▲, ◄, ►, ▼) 56 onthe Remote Control that points to the areayou want to enlarge.To Cancel the Playback Zoom FunctionPress the [P.B. ZOOM] Button 74 on the RemoteControl.• For other notes concerning this item, see page 64.Playback Digital Effect FunctionsDuring playback, special digital effects can be addedto the recorded pictures. The same effects as those ofDigital Effects 1 and 2, which are used duringrecording, are obtained.1 Press the [►] Button 72 .2 Press the [SELECT] Button 59 on theRemote Control to select a desired digitaleffect.• When the [SELECT] Button is pressed repeatedly,the digital effect selection changes.• The same setting can be done using [EFFECTSEL] Sub-Menu on the [TAPE PLAYBACK MENU].To suspend Playback Digital Effect TemporarilyPress the [OFF/ON] Button 61 to suspend orrestart the digital effect. When the digital effect ispaused temporarily, the selected effect’s indicationfl ashes.• The same operating can be done using [EFFECTON] Sub-Menu on the [TAPE PLAYBACK MENU].To Cancel the Digital EffectPress the [SELECT] Button 59 repeatedly on theRemote Control and clear the digital effectindication.Wipe Mode and Mix Mode (RemoteControl Only)1 Press the [►] Button 72 .2 Press the [SELECT] Button 59 on theRemote Control and select [WIPE] or [MIX].3 Press the [STORE] Button 60 at the momentyou want to save as a still picture.• The [ WIPE ] or [ MIX ] Indication appears, andthe image is saved.4 Press the [OFF/ON] Button 61 in the scenein which you want to use the Wipe or Mixeffect.• The scene changes as a result of the Wipe or Mixeffect.• The Wipe Function and Mix Function can onlybe accessed by using the Remote Control duringplayback.• If the [OFF/ON] Button 61 is pressed while Wipe orMix is carried out, the effect will stop temporarily atthat point. Pressing the [OFF/ON] Button 61 againwill bring back the effect.6259617272596160• For other notes concerning this item, see page 64.