Panasonic Digital Palmcorder PV-GS13 Operating Instructions Manual

Contents

Panasonic Digital Palmcorder PV-GS13 Operating Instructions Manual Manual pdf 70 page image

70OthersPlayback (Pictures)Although the Camcorder is correctlyconnected to a TV, playback images cannotbe seen.• Have you selected “Video Input” on the TV?Please read the operating instructions of yourTV and select the channel that matches theinput jacks used for the connection.• Depending on your TV, nothing may be showneven if you correctly connect the Camcorderwith your TV. In this case, set [AV JACK] on the[INITIAL] Sub-Menu to [OUT].Playback picture is not clear.• Are the heads of the Camcorder dirty? If theheads are dirty, playback image cannot be clear.(p. 67)Playing back or recording do not function,the screen has frozen or the indication hasdisappeared.• Turn the Camcorder off. If the Camcorder isnot turned off after operating the [OFF/ON]switch, press the [RESET] Button (p. 13) fi rst.And detach the Battery or AC Adaptor and thenreattach it.Playback (Sound)Sound is not played back from the built-inspeaker of the Camcorder or theheadphones.• Is the volume too low? During playback, pushthe [W/T] Lever to display the [VOLUME]Indication and adjust the volume. (p. 35)Different sounds are reproduced at thesame time.• [12bit AUDIO] on the [PLAYBACK] Sub-Menu ofthe [TAPE PLAYBACK MENU] has been set to[MIX]. As a result, the original sound and soundthat was recorded by audio dubbing are playedback together. It is possible to reproduce thesounds separately. (p. 44)The original sound was erased when audiodubbing was performed.• If you perform audio dubbing on a recordingmade in [16bit] Mode, the original sound willbe erased. If you wish to preserve the originalsound, be sure to select [12bit] Mode at the timeof recording.Playback (Sound)Sounds cannot be played back.• Although a Cassette with no audio dubbing isbeing played, is [12bit AUDIO] on the [PLAYBACK]Sub-Menu of the [TAPE PLAYBACK MENU] setto [ST2]? To play back a Cassette with no audiodubbing, [12bit AUDIO] must be set to [ST1].(p. 44)• Is the Variable Speed Search Function working?Press the [►] Button to cancel the VariableSpeed Search Function. (p. 36)CardRecorded pictures are not clear.• Is [PICT QUALITY] on the [CARD] Sub-Menuset to [NORMAL] or [ECONOMY]? If recordingis done with it set to [NORMAL] or [ECONOMY],images with fi ne details may include amosaic-like pattern. Set [PICT QUALITY] to[FINE]. (p. 25)Photoshot Playback images do not looknormal.• The picture may be damaged. In order toprevent the loss of image data, backing upon a Cassette or a personal computer isrecommended. (pp. 44, 48)During Playback the [UNPLAYABLE CARD]Indication is displayed.• The image was either recorded in a differentformat, or data is damaged.Even if a Card is formatted, it cannot beused.• Either the Camcorder or the Card may bedamaged. Please consult a dealer.OthersThe Camcorder clatters when shaking it.• It is a sound of the lens moving, not amalfunction.When the USB Cable is disconnected, anerror message will appear on PC.• To disconnect the USB cable safely, double-clickthe [ ] icon in the task tray and follow theinstructions on the screen. (p. 49)12Using the RESET button1 Open the LCD Monitor. (p. 19)2 Undo Grip Belt end 1 and pull Lens CapCord 2 downward to loosen Grip Belt.3 Use projection 3 on the Lens Cap to pressthe [RESET] Button 4 .43