Panasonic Digital Palmcorder PV-GS250 Operating Instructions Manual

Also see for Digital Palmcorder PV-GS250: Operating instructions

Contents

Panasonic Digital Palmcorder PV-GS250 Operating Instructions Manual Manual pdf 47 page image

Edit mode47LSQT0862≥For more information, refer to the operatinginstructions for your TV set and recorder.≥When you do not need functional indications ordate and time indications, press the [OSD]button on the remote control for no indication.(When you connect the Camcorder and arecorder with the DV cable, these indicationsmay not appear.)ª When neither image nor sound fromthe Camcorder is output to the TV set≥Check that the plugs are inserted as far as theygo.≥Check the connected terminal.≥When no image is presented on the TV even ifset [BASIC] >> [AV JACK] >> [OUT/Ë], set to[OUT]. (-64-)Recording the contents of otherequipmentYou can dub the contents of other equipment to aDV cassette or card, and can record TVprograms.≥Set to Tape Playback Mode.1 Connect the Camcorder and otherequipment.≥Connect the Camcorder and other equipmentby using the AV cable 1.≥If the recorder has an S-Video terminal, thenalso connect an S-Video cable 2 (optional). Itallows you to record clearer images.2 Set [BASIC] >> [AV JACK] >> [IN/OUT].(Camcorder)3 Turn the power on and start playback.(Other equipment)4 Start recording. (Camcorder)Recording on a tape:5 Set [ADVANCE] >> [REC STDBY] >> [ON].(Camcorder) (Only when the TapeRecording Mode)≥The icon appears.Move the joystick up to start recording.Or, while pressing the [¥REC] button on theremote controller, press the [1] button.Recording on a card:Press the [PHOTO SHOT] button.6 Move the joystick of the Camcorder down orpress the [∫] button on the remotecontroller to stop recording.≥While analog input pictures are beingrecorded on a tape or when the Camcorder isin recording standby mode, the photoshotrecording is disabled.7 Stop playback. (Other equipment)≥Do not plug or unplug the cable during recordingor the recording may not be completed properly.≥Carefully read the operating instructions for yourTV set and video equipment.≥By operating as [SETUP] or [ADVANCE] >>[AUDIO REC], set the recording sound mode([12bit] or [16bit]). (-64-)≥If a picture (bilingual video, etc.) containing mainsound and sub sound has been dubbed, selectthe desired sound by [SETUP] >> [AUDIO OUT]on playback.≥If a picture containing a copyright protectionsignal (copy guard) is recorded, the message“COPY PROTECTED” appears when recordingit on a tape and the picture is distorted bymosaic-like patterns at playback.≥When wide images are input, the display suchas the menu screen or the operation icon isexpanded horizontally.≥If, during recording, an operation such as cueplayback or slow motion playback is performedon external equipment, mosaic-like patternsmay appear on the picture at playback.≥If pictures are recorded when TV broadcastingsignals are weak or pictures are affected bynoise, they may be distorted or may not even beplayed back.≥If both the S-Video cable and the AV cable areconnected, S-video signal are inputpreferentially.1 2[VIDEO OUT][AUDIO OUT][S-VIDEO OUT]AV/S-VIDEOSTOPV/REWSTILL ADV VOL¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTW