Edit mode49LSQT0862ª To cancel the standby for recordingWhen the Camcorder is in standby for recording,move the joystick down and select the [∫] icon.≥Do not plug or unplug the DV cable duringdubbing, or the dubbing may not be completedproperly.≥If a picture (bilingual video, etc.) containing mainsound and sub sound has been dubbed, selectthe desired sound using [SETUP] >>[AUDIO OUT] on playback.≥Even if you use a device equipped with DVterminals such as IEEE1394, you may not beable to perform digital dubbing in some cases.For more information, see the instructions forequipment connected.≥Regardless of the menu settings on therecorder, digital dubbing is carried out in thesame mode as the [AUDIO REC] mode of theplayback tape.≥The images on the recorder monitor may bedisturbed, but it does not affect the recordedimages.≥If a picture containing a copyright protectionsignal (copy guard) is recorded by theCamcorder, the picture is distorted bymosaic-like patterns at playback.≥Disconnect the USB cable since input signalsfrom the external input terminal cannot berecorded while it is connected with the USBcable.≥When wide images are input, the display suchas the menu screen or the operation icon isexpanded horizontally.≥While pictures are input from the DV terminal,the operation icon blinks on instead ofappearing from the side of the screen when youpress the center of the joy stick.Audio dubbingYou can add music or narration to the recordedcassette.≥Set to Tape Playback Mode. (If you performexternal input, set [BASIC] >> [AV JACK] >>[IN/OUT], and connect an input device.)Audio dubbing using the microphone terminal1 Insert a Magic Wire Remote Control withNarration Mic or an external microphonesecurely into the [REMOTE/MIC] terminal asfar as it will go.2 Set [ADVANCE] >> [A. DUB INPUT] >>[MIC].Audio dubbing (external input) using otherequipment (audio equipment, etc.)1 Insert the AV cable (supplied) securely intothe AV terminal as far as it will go.2 Set [ADVANCE] >> [A. DUB INPUT] >>[AV IN].3 Find a scene that you want to add sound to,and press the [;] button on the remotecontrol.4 Press the [A.DUB] button on the remotecontrol to make audio dubbing ready.CAUTION:Unauthorized exchanging and/or copying ofcopyrighted recordings may be copyrightinfringement.REMOTE/MICAV/STOPV/REWSTILL ADV VOLPLAYPAUSEFF/WSTILL ADVW ;V/REWSTILL ADV VOLZOOM¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTWA.DUB ;
