30 POWER SAVESet [ SETUP] >> [ POWER SAVE] >>[5 MINUTES] or [OFF].[OFF]:When about 5 minutes passed without anyoperation, the standby mode automatically will beset. In the standby mode, [ ] blinks and it takestime more than usual to start recording after youpress the Recording Start/Stop Button.[5 MINUTES]:When about 5 minutes passed without anyoperation, the Camcorder automatically turns offto protect the tape or to prevent the battery fromrunning down. When you use the Camcorder, turnit on again.• In the following cases, the power may notturn off even when set [ POWER SAVE] >>[5 MINUTES].- When connecting to the AC Jack(When using the AC Adaptor)- When connecting the USB Cable or the DVCable to a PC or other equipment- When the PC Mode (For PV-GS39/PV-GS69)Menus Related to Playback AUDIO OUTThis switches the sound to be played back.Set [ SETUP] >> [ AUDIO OUT] >>[STEREO], [L] or [R].[STEREO]: Stereo sound (main sound and subsound)[L]: Left channel sound (main sound)[R]: Right channel sound (sub sound)Other Menus INITIAL SET• Set to Tape/Card Recording Mode.Set [ SETUP] >> [ INITIAL SET] >> [YES] or[NO].Set to [YES] to change menu settings back to theirfactory default condition.• The initializing takes a little while.• Language setting cannot be back to the initialshipping condition.LP ModeYou can switch the tape recording speed.• Set to Tape Recording/Playback Mode.1 Set [ BASIC] or [ ADVANCED] >> [REC SPEED] >> [LP].If the LP mode is selected, the recordingtime will be 1.5 times the SP mode, but somefunctions will be disabled.• We recommend using the SP mode for importantrecordings.• In order to fully exhibit the performances of the LPmode, we recommend using Panasonic cassettesmarked LP mode.• Audio dubbing is not possible with LP Mode. (p. 55)• In the LP mode, the picture quality will not bedegraded in comparison with the SP mode, butmosaic noise may appear on the playback image orsome functions may be disabled.- Playback on other digital video equipment or ondigital video equipment without the LP mode.- Playback of the image on other digital videoequipment recorded in the LP mode.- Slow Motion/Still Advance playback. DEMO MODE• Set to Tape Recording Mode.If you set [ SETUP] >> [ DEMO MODE]>> [ON] without inserting a cassette or acard, the Camcorder is automatically set tothe demonstration mode for introducing itsfunctions. If any button is pressed or operated,the demonstration mode is canceled. If nooperations take place for approx. 10 minutes,the demonstration mode automatically starts.To terminate the demonstration mode, insert acassette or a card, or set to [ DEMO MODE] >>[OFF]. For normal use, set this function to [OFF].